Dodge® 4214 D-Flex Type JE Coupling Sleeve, 06 Coupling, 1-7/8 in L, 3-3/4 in OD, 6000 rpm Max, EPDM Rubber
Dodge® 4214 D-Flex Type JE Coupling Sleeve, 06 Coupling, 1-7/8 in L, 3-3/4 in OD, 6000 rpm Max, EPDM Rubber
-
BrandDodge®
-
UPC782475872596
-
Manufacturer Part Number4214
-
CountryUSA
-
Temperature Rating-30 to 275 deg F
-
MaterialEPDM Rubber
-
Maximum Speed6000 rpm
-
Torque Rating450 in-lb
-
TypeType JE
-
Coupling Size06
-
SeriesD-Flex
-
Outside Diameter3-3/4 in
-
Length1-7/8 in
-
Suitable For Use WithD-Flex Coupling
- Rounded EPDM and neoprene element edges for full tooth engagement, even load distribution, reduced stress build up, and longer life
- Outside diameter concentric to bore for ease in alignment
- Interchangeable components makes installation quick and easy
- No lubrication assures trouble-free operation
-
UNSPSC31163005
-
Standards/ApprovalsATEX Certified
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 4214 D-Flex Type JE Coupling Sleeve, 06 Coupling, 1-7/8 in L, 3-3/4 in OD, 6000 rpm Max, EPDM Rubber
Dodge® 4214 D-Flex Type JE Coupling Sleeve, 06 Coupling, 1-7/8 in L, 3-3/4 in OD, 6000 rpm Max, EPDM Rubber
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA113K>
Proto® J343/8 Offset Screwdriver, #3, #4 Phillips® Point, 6-1/8 in OAL
RUS-KIL GRAY PRIMER SPRAY PAINT-BLP109S >
The extra thin wall design allows easy access to recessed wheel nuts where space is limited
Due to the extra thin wall design, they should only be used on wheel nuts where limited torque is applied
For use only with 1/2" drive tools
DO NOT use reducing adapters
Made from high quality chrome-molybdenum steel
BBI 777081 All Threaded Rod, 7/8-9, 3 ft OAL, Steel Alloy, Zinc CR+3
