Browning® 1229129 Minimum Plain Bore Straight Tooth Miter Gear, 12 Diametral Pitch, 20 deg Pressure Angle, 15 Teeth, 1-1/4 in Dia Pitch, 0.27 in W Face, 3/8 to 1/2 in Dia Bore, Unhardened Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289156719
-
Manufacturer Part Number1229129
-
CountryUSA
-
Face Width0.27 in
-
Pitch Diameter1-1/4 in
-
MaterialUnhardened Steel
-
Pressure Angle20 deg
-
Gear Ratio1:1
-
TypeMinimum Plain Bore Straight Tooth
-
Hub Diameter1 in
-
Hub Projection1/2 in
-
Diametral Pitch12
-
Number of Teeth15
-
Bore Diameter3/8 to 1/2 in
-
Overall Length55/64 in
- Browning Gears are rated in accordance with AGMA standards
-
Alternative Part NumberYSM12B15
-
UNSPSC31171700
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Catalog
-
Warranty Information
Recently Viewed
Browning® 1229129 Minimum Plain Bore Straight Tooth Miter Gear, 12 Diametral Pitch, 20 deg Pressure Angle, 15 Teeth, 1-1/4 in Dia Pitch, 0.27 in W Face, 3/8 to 1/2 in Dia Bore, Unhardened Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
1-QT CHAINSAW BAR OIL
1.750" X 2.565" X .313" OIL SEALS-TCM175253TB >
1-1/2" ACCESS ELECTRICAL FITTING-JWH510557 >
HIGH-STRENGTH THREADLOCKER FOR HEAVY-DUTY APPLICATIONS. ESPECIALLY WELL-SUITED FOR PERMANENTLY LOCKING STUDS AND PRESS FITS. ADD 3000 PSI HOLDING POWER ON SLIP AND PRESS FIT ASSEMBLIES. REPLACES SET SCREWS AND SNAP RINGS. LOCKS AGAINST VIBRATION LOOSENING. REQUIRES EXTRA EFFORT OR SPECIAL TOOLS FOR REMOVAL.-JWH591033 >
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
