Dodge® Tigear-2® 35S40R Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid B Shaft Output, 3.23 hp, 40:1 Gear, 44 rpm Maximum Output, 3622 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
-
BrandDodge®
-
UPC782475752867
-
Manufacturer Part Number35S40R
-
CountryUSA
-
Lubrication TypeSynthetic Oil
-
Centre Distance3-1/2 in
-
MaterialGray Iron
-
Torque Rating3622 in-lb
-
Gear Ratio40:1
-
TypeStandard
-
Rotation TypeRight Hand
-
Horsepower3.23 hp
-
Input Maximum Speed1750 rpm
-
Input Size7/8 in
-
Input TypeSeparate
-
Dimensions8.88 in L x 7.05 in W x 10.57 in H
-
Output Maximum Speed44 rpm
-
Output Size1-1/2 in
-
Efficiency60 to 95 %
-
Output TypeSolid B Shaft
- New worm shaft machining process increases gear precision and accuracy by more than twice the norm
- Precise plunge grinding process eliminates invisible lead and assures cool running
- Higher torque capacity
- Greater efficiency
- New bronze gear material has an extremely fine grain structure for maximum durability and minimum wear
-
UNSPSC26111537
-
Package DescriptionEACH
-
Specification Sheet
Recently Viewed
Dodge® Tigear-2® 35S40R Standard Right Angle Worm Gear Speed Reducer, Separate Input, Solid B Shaft Output, 3.23 hp, 40:1 Gear, 44 rpm Maximum Output, 3622 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options.
Klein® Journeyman™ J203-7 General Purpose Standard Long Nose Plier With Wire Stripper, Knurled/Serrated Tool Steel Jaw, 2.438 in L x 0.688 in W Jaw, 7.313 in OAL, 3/32 in W Tip
Work in confined areas with these slim Klein Tools 7-Inch Long-Nose Side-Cutters. Their heavy design cuts through heavier gauge wire, and the knurled jaws enable wire wrapping and looping.
SM SSN402.0 Nipple
HCI Preferred Supplier 940171 Ball Valve, 1/4 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940171 Ball Valve, 1/4 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940176 Ball Valve, 1-1/4 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
HCI Preferred Supplier 940176 Ball Valve, 1-1/4 in Nominal, FNPT End Style, Forged Brass Body, Full Port, PTFE Stem Seal Softgoods
