Dodge® 093407BQC Flex Module, For Use With Size 48 3.4, 5.4 B QC Coupling
Dodge® 093407BQC Flex Module, For Use With Size 48 3.4, 5.4 B QC Coupling
-
BrandDodge®
-
UPC782476238940
-
Manufacturer Part Number093407BQC
-
CountryUSA
-
Suitable For Use WithSize 48 3.4, 5.4 B QC Coupling
-
UNSPSC26111527
-
Package Description1/PK
-
Specification Sheet
Recently Viewed
Dodge® 093407BQC Flex Module, For Use With Size 48 3.4, 5.4 B QC Coupling
Dodge® 093407BQC Flex Module, For Use With Size 48 3.4, 5.4 B QC Coupling
RCSM-B-3/4/65 INA BEARING a specialized, noise-tested radial insert ball bearing with a rubber interliner COMPANY
• Shaft Diameter (d): 3/4 inch (19.05 mm)
• Outside Diameter (D): 65.1 mm (approx. 2.563 inches) including the rubber interliner
• Total Assembly Width (B1): 36.2 mm (approx. 1.425 inches)
• Locking Device: Eccentric self-locking collar
• Sealing: Double-lip P contact seals on both sides to trap grease and repel airborne grit
RCRA-3/4 INA BEARING specialized radial insert ball bearing with a rubber interliner/boot
3/4"-ID BEARING-INARCRA3/4>
Browning® 767848 VPS 200 Normal Duty Pillow Block Ball Bearing, 1-1/8 in Dia Bore, 4-5/32 to 5-3/32 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 6-3/16 in OAL x 3-9/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767566 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-5/8 to 5-3/8 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-3/4 in OAL x 3-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
W-7/8 INA BEARING single-direction thrust ball bearing
• Bore Diameter (d): 7/8 inch (0.875 in / 22.225 mm)
• Outside Diameter (D): 1-21/32 inches (1.656 in / 42.06 mm)
• Height / Width (T): 5/8 inch (0.625 in / 15.875 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
• Load Capacities: 4,220 lbf basic dynamic axial load and 7,860 lbf static axial load
