Dichtomatik 75115263 O-Ring, 252 Dash Number, 5.234 in ID x 5.512 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
-
BrandDichtomatik
-
Manufacturer Part Number75115263
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialPTFE
-
ColorWhite
-
Inside Diameter5.234 in
-
Domestic/ImportImport
-
Durometer55
-
Outside Diameter5.512 in
- Good chemical resistance to aggressive acids, bases, alcohols and oils
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|ISD Certified|NFPA Listed|PTDA Certified
-
Alternative Part NumberTEF252
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Dichtomatik 75115263 O-Ring, 252 Dash Number, 5.234 in ID x 5.512 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
Eklind® 25169 Ergo-Fold™ Key Set, 6 Pieces, 2 to 6 mm Hex, Foldable Ergonomic Grip Handle, Alloy Steel, Black Oxide
Eklind® 25169 Ergo-Fold™ Key Set, 6 Pieces, 2 to 6 mm Hex, Ergonomic Grip/Fold-Up Handle, Alloy Steel, Black Oxide
MORSE® 20208 773 Screw Extractor, #8 Extractor, 3/4 to 1-1/32 in Drill, For Screw Size: 1-3/8 to 1-3/4 in, 4-3/8 in OAL
MORSE® 20208 773 Screw Extractor, #8 Extractor, 3/4 to 1-1/32 in Drill, For Screw Size: 1-3/8 to 1-3/4 in, 4-3/8 in OAL
Eklind® 60811 Power-T™ Long Key Set, 11 Pieces, 5/64 to 3/8 in Hex, T-Handle Handle, ANSI B18.3, Alloy Steel, Black Oxide
Eklind® 60811 Power-T™ Long Key Set, 11 Pieces, 5/64 to 3/8 in Hex, T-Handle Handle, ANSI B18.3, Alloy Steel, Black Oxide
6-GRV A OR B-BELT SF-BUSH SHEAVES-IDC6B074SF >
Reed 03532 Replacement Cutter Wheel, 0.45 in Blade Exposure, For Use With 5301PD and 5401TMSO Pipe Cutter
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
