Dichtomatik S70234 O-Ring, 234 Dash Number, 2.984 in ID x 3.262 in OD, Silicone Rubber, 70 Shore A Durometer, Import, Custom 234-SILICONE
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberS70234
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialSilicone Rubber
-
ColorRed
-
Inside Diameter2.984 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter3.262 in
- Good chemical stability in water (up to 100 deg C), aliphatic engine and transmission oils, animal and plant based oils and greases
- Not resistant to fuels, aromatic mineral oils, water vapor (short periods up to a maximum of 120 deg C are possible), silicone oils and greases, along with acids and alkaline compounds
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|ISD Certified|NFPA Listed|PTDA Certified
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
LOVELY CLEAR GLASS CHARMER FOR BEDSIDE OR NIGHTSTAND WITH A DELIGHTFULLY PRACTICAL FINGER HOLD BEADED BASE. ENCHANTNGLY DISTINQUISHED BY A FINE PEWTER-PLATED BURNER AND TRADITIONAL TAPERED CHIMNEY.
JWH660612 >
4" FOAM PAINT BRUSH--PLASTIC HANDLE-JWH780809 >
Koyo 17831 Cylindrical Bearing Cup, 79.985 mm OD, 15.08 mm W Cup, 19.842 mm W Bearing, 76 mm Dia Max House Shoulder
RIDGID® 39860 Lock Screw, For Use With RIDGID® 811A, 842, 555 Die Head
RIDGID® 39860 Lock Screw, For Use With RIDGID® 811A, 842, 555 Die Head
MORSE® 51014 5374 Standard Length Jobber Length Drill Bit, 1/32 in Drill - Fraction, 0.0312 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
