Dichtomatik 75115235 O-Ring, 225 Dash Number, 1.859 in ID x 2.137 in OD, PTFE, 55 Durometer, Import, Custom 225-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
-
BrandDichtomatik
-
Manufacturer Part Number75115235
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialPTFE
-
ColorWhite
-
Inside Diameter1.859 in
-
Domestic/ImportImport
-
Durometer55
-
Outside Diameter2.137 in
- Good chemical resistance to aggressive acids, bases, alcohols and oils
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|ISD Certified|NFPA Listed|PTDA Certified
-
Alternative Part NumberTEF225
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Dichtomatik 75115235 O-Ring, 225 Dash Number, 1.859 in ID x 2.137 in OD, PTFE, 55 Durometer, Import, Custom 225-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
You will be covered by MCR Safety's high quality virgin vinyl aprons. Vinyl is liquid proof so workers will be protected from the elements encountered in food processing applications, as well as your day to day dirty jobs. The O63R5 is made of 6 mil blue vinyl material and measures 35 inches wide x 48 inches long. It also features raw edges and comes with three strings to secure it safely on the user. Looking for the best vinyl aprons? Look no further than MCR Safety!
Dodge® 006046 Babbitted Split Pillow Block Plain Sleeve Bearing, 1-11/16 in Dia Bore, 5-1/8 to 5-3/8 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6-3/4 in OAL x 3-1/16 in OAH
Dodge® 006046 Babbitted Split Pillow Block Plain Sleeve Bearing, 1-11/16 in Dia Bore, 5-1/8 to 5-3/8 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6-3/4 in OAL x 3-1/16 in OAH
