Dichtomatik 75102147 O-Ring, 225 Dash Number, 1.859 in ID x 2.137 in OD, FKM, 75 Shore A Durometer, Import, Custom 225-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part Number75102147
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialFKM
-
ColorBlack
-
Inside Diameter1.859 in
-
Domestic/ImportImport
-
Durometer75 Shore A
-
Outside Diameter2.137 in
- Good chemical resistance to mineral oils and greases, synthetic oils and greases, motor, transmission and ATF oils up to 150 deg C
- Very good weathering, ozone and aging resistance
- Very low gas permeability
-
UNSPSC31401503
-
Standards/ApprovalsASTM D1418|AS 568B|BS 1806|JIS 2401
-
Alternative Part NumberV75225
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dichtomatik 75102147 O-Ring, 225 Dash Number, 1.859 in ID x 2.137 in OD, FKM, 75 Shore A Durometer, Import, Custom 225-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
GreenleeĀ® 00835 Short Hole Saw Kit, 13 Pieces, For Use With 1/2 to 4 in Conduit, Bi-Metal
GreenleeĀ® 835 Hole Saw Kit, 13 Pieces, For Use With 1/2 to 4 in Conduit, Bi-Metal
DodgeĀ® 126148 207 Medium Duty Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
For over 70 years, DodgeĀ® has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built to manufacture the new DodgeĀ® design. The result is the DodgeĀ® SC/SCM/SL line. Its premium features make it the most reliable setscrew mounted ball bearing on the market and provides the user unmatched quality and true total value.
SealmasterĀ® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the SealmasterĀ® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The SealmasterĀ® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options.
MCR Safety CK22Y CheckmateĀ® 2 Value Lightweight Safety Glasses With Side Shields, DuramassĀ® Hard Coat, Yellow Mirror Lens, Frameless Frame, Smoke/Yellow, Polycarbonate Frame, ANSI Z87+
MCR Safety CK22Y CheckmateĀ® 2 Value Lightweight Safety Glasses With Side Shields, DuramassĀ® Hard Coat, Yellow Mirror Lens, Frameless Frame, Smoke/Yellow, Polycarbonate Frame, ANSI Z87+
