Dichtomatik N70159 O-Ring, 159 Dash Number, 4.987 in ID x 5.193 in OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 159
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70159
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter4.987 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter5.193 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
DOUBLE SHIELDED MINI BALL BEARINGS-SNRR6ZZ>
Appleton® UNILETS™ 8438R Ball Swivel Hanger Cover, 1/2 in, For Use With SHC Flexible Fixture Hanger, Malleable Iron/Steel
Appleton® UNILETS™ 8438R Ball Swivel Hanger Cover, 1/2 in, For Use With SHC Flexible Fixture Hanger, Malleable Iron/Steel
Pyramex® SB2820S Fully Adjustable Safety Eyewear, Anti-Scratch, Gray Lens, Black, Polycarbonate Frame, ANSI Z87.1, CE EN166, MIL-PRF 32432
Pyramex® SB2820S Fully Adjustable Safety Eyewear, Anti-Scratch, Gray Lens, Black, Polycarbonate Frame, ANSI Z87.1, CE EN166, MIL-PRF 32432
LOCTITE® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.
TLEDM48T818W840 48" 18-watt T-8 840-k Led Bulb
48" 18-WATT T-8 840-K LED BULBS-BULTLEDM48T818W840>
