Dichtomatik N70148 O-Ring, 148 Dash Number, 2.737 in ID x 2.943 in OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 148t
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70148
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter2.737 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter2.943 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
A LOW COST, PLASTIC PUTTY KNIFE THAT IS EXTREMELY FLEXIBLE AND RETAINS A CLEAN, SHARP EDGE. IT IS NOT AFFECTED BY MOST SOLVENTS. GREAT FOR SPACKLE, WATER PUTTY, CRACK FILLER, STUCCO, DRYWALL PATCH, CAULK AND WINDOW PATCH.
-JWH775576 >
Enerpac® RSM-1000 Low Height Single Acting Spring Return Portable Hydraulic Cylinder, 100 ton Capacity, 0.63 in L Stroke, 10000 psi
Enerpac® RSM-1000 Low Height Single Acting Spring Return Portable Hydraulic Cylinder, 100 ton Capacity, 0.63 in L Stroke, 10000 psi
Leviton® 5256-VY Cable Mount Grounding High Visibility Straight Blade Plug, 125 V AC, 15 A, 2 Poles, 3 Wires, Yellow
Leviton® industrial grade straight blade devices are built to provide unparalleled quality and superior performance in the most severe industrial settings. Leviton® combines the best materials available with superior production standards to produce a broad selection of straight blade devices of unmatched flexibility and dependability.
Klein Tools' 6 Pocket Tool Pouch keeps tools where they are needed, when they are needed. This pouch is great for carrying a variety of tools for everyday jobs. Attaches to any belt up to 2.5-Inch wide and seamlessly connects to Klein's MODbox™ Mobile Workstation for easy storage and accessibility.
Wilton® 11710 Super Precision Milling Vise, 17-1/2 in L x 7-17/32 in H, 6 in Jaw, Alloy Steel
Wilton® 11710 Super Precision Milling Vise, 17-1/2 in L x 7-17/32 in H, 6 in Jaw, Alloy Steel
