Dichtomatik N70034 O-Ring, 034 Dash Number, 2.114 in ID x 2.254 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70034
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter2.114 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter2.254 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
Dichtomatik N70034 O-Ring, 034 Dash Number, 2.114 in ID x 2.254 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Gator® GatorGrit 3263 Multi-Purpose Coated Sanding Sheet, 11 in L x 9 in W, 120 Grit, Aluminum Oxide Abrasive, Paper Backing
Gator® GatorGrit 3263 Multi-Purpose Coated Sanding Sheet, 11 in L x 9 in W, 120 Grit, Aluminum Oxide Abrasive, Paper Backing
Oatey® Fast Set™ Closet Flange quickly and easily connects a water closet outlet to a plumbing system and sits flush with the floor. Available in a variety of materials and styles, this toilet flange includes four screw holes for easy installation. The Oatey products have earned the trust of plumbing professionals for over 100 years.
GP® 9903M Standard Length Socket, 1/4 in Hex Drive, 3 mm
Assortment contains 20 each of the following thicknesses: 0.001 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.01 in, 0.015 in, 0.02 in, 0.025 in, 0.05 in, 0.075 in, 0.1 in and 0.125 in. Made from a 300 series stainless steel that resists rust and corrosion. Size A - 2 x 2 in. Slot size - 5/8 in. Packaged in a durable metal box. Precision Brand® Slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators and other plant machinery. Slotted shims are economical, safe and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.
Wilton® WL9-86220 Classic™ Regular Duty F-Clamp, 4-3/4 in D Throat, 18 in Jaw Opening
The Wilton® Classic series F-clamps are among the first of their kind. With a timeless design this series is an industry favorite. A simple, no-frills construction means it simply gets the job done.
