Dichtomatik 75189227 O-Ring, 19 mm ID x 24 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom H-2.5 X 19
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part Number75189227
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter19 mm
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter24 mm
- Good chemical resistance to mineral oils and greases
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
-
Alternative Part NumberN2.50X019
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dichtomatik 75189227 O-Ring, 19 mm ID x 24 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom H-2.5 X 19
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
The Klein Tools BX and Armored Cable Cutter is simple to use. It easily cuts armored cable up to 3/8-Inch (9.5 mm) diameter: BX, AC, MC, MCAP and Greenfield, with a couple of turns of the handle. Swift cutting blade eliminates burrs and won't nick cable. Comes with one blade stored in handle for convenience. Up to six replacement blades can be stored in handle.
MORSE® 44574 4581 Center Cutting Double End Regular Length End Mill, 3/4 in Dia Cutter, 1-5/16 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 5 in OAL, Bright
Browning® 765271 VER 200 Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger and Snap Ring, 1-1/4 in Dia Bore, 3.078 in OD, 1 Rows, 1.688 in W, 5782 lb Dynamic/3493 lb Static Load
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
4" SHOULDER DRIVE ROCK BITS-TAM440RB64D >
Gates® Power Transmission Hi-Power® II PowerBand® 2/B150 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 153 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
