Littelfuse® POWR-GARD® LKN150 Fuse Link, 250 VAC, 150 A, For Use With RLN Series Class H Single Element Renewable/Time Delay Fuse
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
-
BrandLittelfuse®
-
UPC079458320862
-
Manufacturer Part NumberLKN150
-
CountryUSA
-
Rated Breaking Capacity10 kA
-
Frequency Rating50/60 Hz
-
Mounting TypeBlade
-
Voltage Rating250 V AC
-
Amperage Rating150 A
-
SeriesLKN
-
Dimensions7-1/8 in L x 1-1/2 in W
-
Suitable For Use WithRLN Series Class H Single Element Renewable/Time Delay Fuse
- Electrically connected to the end blade
-
UNSPSC39121609
-
Standards/ApprovalsUL Listed|CSA Certified|CE Marked|RoHS Compliant|PROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Recently Viewed
Littelfuse® POWR-GARD® LKN150 Fuse Link, 250 VAC, 150 A, For Use With RLN Series Class H Single Element Renewable/Time Delay Fuse
The LKN Series are fuse links designed for Littelfuse RLN series renewable fuses. Traditionally, Class H fuses were used to provide low cost protection of general purpose feeder and branch circuits where available short-circuit currents did not exceed 10,000 amperes. However, generally increased levels of available fault current and the distinct possibility that renewable fuses may be improperly renewed, rendering them unsafe, have all but eliminated the use of these fuses in new applications. In addition, escalating labour costs and increasing automation, which makes downtime very expensive, have greatly reduced or eliminated the cost savings attributed to renewable fuses.
BBI 486206 Lag Bolt, 5/16-9, 1 in OAL, Low Carbon Steel, Zinc Plated (CR+3)
Master Lock® 410KAORJ Zenex™ 410 Lockout Padlock, Alike Key, Orange, Thermoplastic Body, 1/4 in Dia x 1-1/2 in H x 25/32 in W Steel Shackle, 1-3/4 in L Body
410 thermoplastic safety padlock. 1-1/2 in (3.8cm) wide 1-3/4 in (4.4cm) tall thermoplastic orange body, shackle with 1-1/2 in (3.8cm) clearance. Designed exclusively for Lockout/Tagout applications. Durable, lightweight, non-conductive Thermoplastic lock body. Customize on-site with permanent, write-on labels. Compliance with OSHA inone employee, one lock, one key in directive. High security, reserved-for-safety cylinder. Key retaining-ensures that padlock is not left unlocked. Keyed alike 6-pin tumbler cylinder. commercial boxed packaging, shelf pack quantity 6, master carton quantity 36.
Dichtomatik N70438 O-Ring, 438 Dash Number, 6.225 in ID x 6.775 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
POWERATED FHP V-BELT >(5-L-770)-GAT6977 >
BBI 241016 Dowel Pin, 1/16 in Dia x 1/2 in L, Alloy Steel, Plain
