Littelfuse® POWR-GARD® JLLS300 Current Limiting Fast Acting Fuse, 300 A, 600 V AC/300 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving class T fuses are the most compact fuses available in ratings above 30 A less than one-third the size of comparable class R fuses. When rated in accordance with the NEC, class T fuses provide fast acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of class T fuses must be increased to prevent opening on inrush currents. In such instances, class T fuses may provide only short circuit protection.
-
BrandLittelfuse®
-
UPC079458190915
-
Manufacturer Part NumberJLLS300
-
CountryUSA
-
Terminal TypeKnife Blade
-
MaterialMelamine
-
ClassT
-
TypeCurrent Limiting
-
Mounting TypeHolder
-
Voltage Rating600 V AC/300 V DC
-
Amperage Rating300 A
-
SeriesJLLS
-
Indicating/Non-IndicatingNon-Indicating
-
Interrupt Rating20/200 kA
-
Body Size1.59 in Dia x 3.63 in L
-
Body TypeCartridge
- Extremely current- limiting compact design
- Protection of individual electric services and meters
- Used to provide compact protection for meter stacks
- Current limiting design greatly reduces damage to equipment caused by heating and magnetic effects of short circuit currents
- 200 kA AC rms symmetrical and 20 kA DC interrupt rating
- Copper caps
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 486M14 |
-
Alternative Part NumberJLLS300.X|8580348
-
UNSPSC39121627
-
IDEA Index ID8580348
-
Package DescriptionEACH
-
Standards/ApprovalsUL 248-15|UL File No. E81895|CSA Certified|PROP65: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer.
-
Specification Sheet
-
Owners/User Manual
-
Full Engineering Drawing
-
Technical Bulletin
Recently Viewed
Littelfuse® POWR-GARD® JLLS300 Current Limiting Fast Acting Fuse, 300 A, 600 V AC/300 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving class T fuses are the most compact fuses available in ratings above 30 A less than one-third the size of comparable class R fuses. When rated in accordance with the NEC, class T fuses provide fast acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of class T fuses must be increased to prevent opening on inrush currents. In such instances, class T fuses may provide only short circuit protection.
HCI Preferred Supplier HNV38M Interchange Pipe Plug, 3/8 in Nominal, FNPT End Style, Steel
HCI Preferred Supplier HNV38M Interchange Pipe Plug, 3/8 in Nominal, FNPT End Style, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Knipex® 13 72 8 SBA 13 72 Component Handle Wire Stripper, 200 mm OAL
Koyo 81206TVPB Cylindrical Bore Needle Roller Thrust Bearing
Cylindrical roller thrust bearings provide rolling bearing arrangements that accommodate high-dynamic axial loads. The simple geometry of the bearing components allows the use of many design arrangements. As an example, for less demanding applications, it is possible to combine metric series, thrust cylindrical roller and cage assemblies, including the metric series heavy thrust washers (LS, CPR) and even the metric series thin thrust washers (AS, CP). These two thrust washer types are more commonly used with thrust needle roller and cage assemblies. Thrust cylindrical roller and cage assemblies also can be used without bearing thrust washers if the adjacent machine components can be prepared to serve as suitable raceways. Cylindrical roller thrust bearings may be used where the load carrying capability of thrust needle roller and cage assemblies is insufficient. Also, the bearings can accommodate high-dynamic and static axial loads in one direction, but they are not suitable to transmit radial loads.
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
