Bussmann Bullet™ ECSR50 Current Limiting Time Delay Fuse, 50 A, 600 V, 200 kAIC Interrupt, RK5 Class, Cartridge Body
Edison's UL Class RK5 dual-element, time-delay fuses provide economical solutions to overcurrent protectioni. Available in both 250Vac and 600Vac, with 200kA RMS Sym interrupting ratings and sizes ranging from 0 to 600 amp.
-
BrandEdison
-
UPC782634508380
-
Manufacturer Part NumberECSR50
-
CountryUSA
-
Terminal TypeFerrule End
-
MaterialFiberglass
-
ClassRK5
-
Rejection/Non-RejectionRejection
-
Response Time10 s at 500%
-
TypeCurrent Limiting Time Delay
-
Mounting TypeHolder
-
Voltage Rating600 V
-
Amperage Rating50 A
-
SeriesECSR
-
Indicating/Non-IndicatingNon-Indicating
-
Interrupt Rating200 kAIC
-
Body Size1.06 in Dia x 5.5 in L
-
Body TypeCartridge
-
ElementDual
- Provides motor overload, ground fault and short circuit protection
- When used in circuits subject to surge currents such as those caused by motors, transformers and other inductive components, these fuses can be sized close to full load amps to give maximum overcurrent protection
- The time delay feature makes it possible to use fuse amp ratings which are much smaller than those of non-time delay fuses
- Considerable cost savings occur by permitting the use of smaller size switches, panels and fuses themselves
- Provides a higher degree of short circuit protection (greater current limitation) in circuits in which surge currents or temporary overloads occur
- Gives motor running back-up protection to motors without extra costs
- Helps protect motors against burnout from 1 ph on 3 ph systems
- Simplifies and improves blackout prevention (selective co-ordination ratios)
- Dual element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short circuit and overload protection
- Superior overload and cycling capabilities
-
Alternative Part Number11197041
-
UNSPSC39121606
-
IDEA Index ID11197041
-
Package DescriptionEACH
-
Standards/ApprovalsCE Certified|CSA C22.2 File No.248.12 Guide JDDZ|UL File No.E162363
-
Specification Sheet
Recently Viewed
Bussmann Bullet™ ECSR50 Current Limiting Time Delay Fuse, 50 A, 600 V, 200 kAIC Interrupt, RK5 Class, Cartridge Body
Edison's UL Class RK5 dual-element, time-delay fuses provide economical solutions to overcurrent protectioni. Available in both 250Vac and 600Vac, with 200kA RMS Sym interrupting ratings and sizes ranging from 0 to 600 amp.
Crosby® 1018393, G-209-5/16, Anchor Shackle, 0.75 ton Load, 5/16 in, 3/8 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018393 Anchor Shackle, 0.75 ton Load, 5/16 in, 3/8 in Dia Screw Pin, Hot Dipped Galvanized
Gates® Power Transmission PowerGrip® HTD® 1062-3M-09 Synchronous Belt, 9 mm W, 1062 mm OAL, 3 mm Pitch, 354 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
V-BELTOUTSIDE CIRCUMFERENCE 107"-JASA105 >
Crosby® 1027203 H-330-5/8 Grab Hook, 5/8 in Trade, 13000 lb Load, Clevis Attachment, Forged Carbon Steel
Crosby® 1027203 H-330 Grab Hook, 5/8 in Trade, 13000 lb Load, Clevis Attachment, Forged Carbon Steel
Browning® 1069558 Split Taper Bushing, 3/4 in Dia Bore, 1.793 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 2-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
