Gates® Power Transmission PowerGrip® HTD® 1062-3M-09 Synchronous Belt, 9 mm W, 1062 mm OAL, 3 mm Pitch, 354 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC72053610086
-
Manufacturer Part Number1062-3M-09
-
CountryUSA|Canada
-
Pitch3 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width9 mm
-
Series9293
-
Number of Teeth354
-
Overall Length1062 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92930384
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 1062-3M-09 Synchronous Belt, 9 mm W, 1062 mm OAL, 3 mm Pitch, 354 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
IMPULSE SPIKE YARD SPRINKLER-JWH756630 >
HEAVY-DUTY IMPACT SPRINKLER. COVERAGE TO 86 FT. IN. DIAMETER. FEATURES IMPACT-RESISTANT POLY HEAD WITH POLY TRIPLE SPIKE. SERIES CONNECTION TO LINK MULTIPLE SPRINKLERS.
JWH724345 >
Sealmaster® 700367 SCHB Non-Expansion Standard-Duty Hanger Ball Bearing Unit With Seal Flinger, 2 in Dia Bore, 4.38 in OD, 2.03 in W, Cast Iron Bearing, Set Screw Collar Locking
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing and lubrication options or industry specific solutions.
765376 DO-IT-BEST/BEST GARDEN POLY 2600 FSQ. FT. BLUE AND GRAY OSCILLATING SPRINKLER
POLY OSCILLATING SPRINKLER IDEAL FOR WATERING LARGE, RECTANGULAR AREAS. FEATURES EASY CLICK DIAL TO ADJUST WATERING PATTERN AREA ALLOWING SPRINKLER TO CONFORM TO A VARIETY OF YARD WIDTHS AND LENGTHS., FULL, PARTIAL, OR RIGHT COVERAGE.
-JWH765376>
SMALL ENGINE IDLER-SIL34023 >
