Liquid Tight Straight Cord Connectors
Arlington LPCG503 Low Profile Liquidtight Oiltight Strain Relief Cord Connector, 1/2 in Trade, 0.1 to 0.3 in Cable Openings, Nylon/Polyethylene/Santoprene™/Zinc
Arlington low profile cord connector has a unique grommet with gripping fingers. These connectors have the largest cord range in the industry, so there are fewer items to stock. a liquidtight seal and superior pullout resistance is accomplished by just tightening the nut. a sealing ring is furnished to assure a liquidtight seal when installing in non-threaded openings.
Arlington LPCG753 Low Profile Liquidtight Oiltight Strain Relief Cord Connector, 3/4 in Trade, 0.1 to 0.3 in Cable Openings, Nylon/Polyethylene/Santoprene™/Zinc
Arlington low profile cord connector has a unique grommet with gripping fingers. These connectors have the largest cord range in the industry, so there are fewer items to stock. a liquidtight seal and superior pullout resistance is accomplished by just tightening the nut. a sealing ring is furnished to assure a liquidtight seal when installing in non-threaded openings.
Arlington LPCG754 Low Profile Liquidtight Oiltight Strain Relief Cord Connector, 3/4 in Trade, 0.24 to 0.472 in Cable Openings, Nylon/Polyethylene/Santoprene™/Zinc
Arlington low profile cord connector has a unique grommet with gripping fingers. These connectors have the largest cord range in the industry, so there are fewer items to stock. a liquidtight seal and superior pullout resistance is accomplished by just tightening the nut. a sealing ring is furnished to assure a liquidtight seal when installing in non-threaded openings.
Plugs, connectors and boxes/enclosures in harsh areas demand strain relief for optimal performance. Woodhead® grips reduce cord arc bend, assist in the load support of a hanging box and help to prevent cord pullout. Woodhead® offers a solution for both standard and wet-location environments to ensure maximum life. Deluxe cord grips feature an aluminum body integrated with a stainless steel mesh. Non-metallic MAX-LOC® grips are available with an O-ring and stainless steel or non-metallic mesh and are suitable for wet locations. Dust-tight grips are very popular for general use enclosure or box installations. Wiring device cord grips can be used on cord-clamp style plugs and connectors and threaded cord grips can be used with Watertite® or other threaded style connections.
Recently Viewed
MORSE® 38012 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M14x2 Thread, D7 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
24" BROWN PLASTIC PUSH BROOM (HEAD ONLY) - MAG2224A >
72 TOOTH H-PITCH QUICK DISCONNECT SF TIMING BELT SHEAVES-IDCQD72H200SF >
FEMALE DISCONNECTS--PK/100-PENFR4B110C >
Browning® 1076736 QD Bushing, 1-7/16 in Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
RACO® 471 Gangable Switch Box, Steel, 10.5 cu-in Capacity, 1 Gangs, 1 Outlets, 5 Knockouts, 2 in H x 4.22 in W x 2.25 in D
RACO® 471 Gangable Switch Box, Steel, 10.5 cu-in Capacity, 1 Gangs, 1 Outlets, 5 Knockouts, 2 in H x 4.22 in W x 2.25 in D
