402-008-0100 #8 X 1" Flat Head Slotted Wood Screw
#8 X 1" Flat Head Slotted Wood Screw
-
BrandGeneric
-
Manufacturer Part NumberNBS4020080100
Recently Viewed
#8 X 1" Flat Head Slotted Wood Screw
Weiler® 44064 Hand Wire Scratch Brush, 5 in Brush, 10 in L x 1-1/8 in W Block, 1-3/16 in L Stainless Steel Trim
Weiler® 44064 Hand Wire Scratch Brush, 5 in Brush, 10 in L x 1-1/8 in W Block, 1-3/16 in L Stainless Steel Trim
Morse® 177276 MHS Advanced Hole Saw, 1-11/16 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
Morse, MHS27 (177276), 1-11/16" (43mm) diameter, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per box. Seperate arbor required, use Morse M35 (139045), MA35PSN (139052) or MA45PSN (139069). To optimize performance consider using Morse CUTLUBE (121408).
21505-88 Radial/Deep Groove Ball Bearing - Straight Bore, 0.3125 in ID, 0.9060 in OD, 0.3125 in Width, Double Sealed, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN2150588>
Dichtomatik 75102154 O-Ring, 232 Dash Number, 2.734 in ID x 3.012 in OD, FKM, 75 Shore A Durometer, Import, Custom 232-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Southwire Madison Electric 29 C-Type Beam Clamp, 200 lb Load, Malleable Iron/Steel, Zinc Plated
C-Type Beam Clamp, 200 lb Load, Malleable Iron/Steel, Zinc Plated
