Weiler® 44064 Hand Wire Scratch Brush, 5 in Brush, 10 in L x 1-1/8 in W Block, 1-3/16 in L Stainless Steel Trim
Weiler® 44064 Hand Wire Scratch Brush, 5 in Brush, 10 in L x 1-1/8 in W Block, 1-3/16 in L Stainless Steel Trim
-
BrandWeiler®
-
UPC012382440640
-
Manufacturer Part Number44064
-
CountryUSA|Canada
-
FinishSanded
-
Trim Length1-3/16 in
-
Trim MaterialStainless Steel
-
Trim Size0.012 in
-
TypeHand Wire
-
Handle MaterialHardwood
-
Handle TypeShoe
-
Number of Rows4 x 16
-
Block Size10 in L x 1-1/8 in W
-
Block TypeHardwood
-
Brush Size5 in
- Scratch brushes are constructed of dense filament/wire with an even trim for a consistent brushing action
- These quality brushes are made with the finest materials, yet priced to give the lowest cost-per-use
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 564K55 |
| Fastenal | 5138-44064 |
-
UNSPSC47131605
-
Package Description12/PK
-
SDS
Recently Viewed
Weiler® 44064 Hand Wire Scratch Brush, 5 in Brush, 10 in L x 1-1/8 in W Block, 1-3/16 in L Stainless Steel Trim
Weiler® 44064 Hand Wire Scratch Brush, 5 in Brush, 10 in L x 1-1/8 in W Block, 1-3/16 in L Stainless Steel Trim
Morse® 177276 MHS Advanced Hole Saw, 1-11/16 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
Morse, MHS27 (177276), 1-11/16" (43mm) diameter, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per box. Seperate arbor required, use Morse M35 (139045), MA35PSN (139052) or MA45PSN (139069). To optimize performance consider using Morse CUTLUBE (121408).
21505-88 Radial/Deep Groove Ball Bearing - Straight Bore, 0.3125 in ID, 0.9060 in OD, 0.3125 in Width, Double Sealed, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN2150588>
Dichtomatik 75102154 O-Ring, 232 Dash Number, 2.734 in ID x 3.012 in OD, FKM, 75 Shore A Durometer, Import, Custom 232-VITON
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Southwire Madison Electric 29 C-Type Beam Clamp, 200 lb Load, Malleable Iron/Steel, Zinc Plated
C-Type Beam Clamp, 200 lb Load, Malleable Iron/Steel, Zinc Plated
DRILLCO 400N104 Type B Heavy Duty Jobber Length Drill Bit, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, 135 deg Point, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
