MORSE C/Tool 12-MM X 1.75 SPIRAL FLUTE TAPS MCT 34851
Onyx 34851 2102M General Purpose Spiral Flute Tap, Right Hand Cutting, M12x1.75 Thread, D6 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, Steam Oxide, HSS
-
BrandOnyx
-
UPC686125348519
-
Manufacturer Part Number34851
-
CountryUSA
-
Finish/CoatingSteam Oxide
-
Thread Length0.63 in
-
MaterialHSS
-
Thread LimitD6
-
Thread SizeM12x1.75
-
Chamfer TypeSemi-Bottoming
-
Class of FitD6
-
Measurement SystemMetric
-
TypeGeneral Purpose
-
Series2102M
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length3-3/8 in
- Reduce neck design and shorter thread length for increased coolant flow to the cutting edge, enhanced chip evacuation and reduced contact between tap and workpiece
- For tapping a wide range of materials up to 28Rc hardness
- Steam oxide over nitride increases wear resistance, reduces friction, reduces galling and chip welding, improves chip flow and increases tap lubricant retention
- The spiral flutes draw the chips out of the hole
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | MT7934851 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
Onyx 34851 2102M General Purpose Spiral Flute Tap, Right Hand Cutting, M12x1.75 Thread, D6 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, Steam Oxide, HSS
Drillco 429A204 4290 Construction Reamer, Imperial, 1-1/16 in Dia x 6-7/8 in L, 1-5/8 in Dia Hex Shank, Spiral Flute
Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment.
MORSE® 15519 1439 Drill Blank, #22 Drill Blank, 3-1/8 in L, HSS
MORSE® 15508 1439 Drill Blank, 1/8 in Drill Blank, 2-3/4 in L, HSS
Apex® MDB-08 Magnetic Power Drive Nutsetter, 1/4 in Hex Point, Hex Shank, 2-9/16 in OAL, Steel
Apex® MDB-08 Magnetic Power Drive Nutsetter, 1/4 in Hex Point, Hex Shank, 2-9/16 in OAL, Steel
Drillco 28A050AB 2800 Straight Flute Tap, Right Hand Cutting, M5x0.8 Thread, D4 Thread Limit, Bottoming Chamfer, 4 Flutes, Uncoated, HSS
Straight Flute “Hand Taps” are the most popular and versatile style of taps in general machine tapping operations. They are for general use in production tapping or hand operations in a wide range of application material groups.
