MORSE C/Tool 3/4" FINE ROUGHING ENDMILLS TIN MCT 44983
MORSE® 44983 4613G Center Cutting Regular Length Roughing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, TiN Coated
-
BrandMORSE®
-
UPC686125449834
-
Manufacturer Part Number44983
-
CountryUSA
-
FinishTiN Coated
-
MaterialM42 HSS-Co 8
-
Flute TypeFine Pitch
-
TypeCenter Cutting Regular Length
-
Helix Angle30 deg
-
Series4613G
-
Cutter Diameter3/4 in
-
Shank Diameter3/4 in
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Shank TypeRound/Weldon Flat
-
Length of Cut1-5/8 in
-
Overall Length3-7/8 in
- Roughing end mills feature a chip breaker type cutting edge for heavier cuts, higher speeds and feeds and greatly increased productivity
- Fine pitch is recommended for difficultto-machine, high tensile strength, abrasive and harder materials up to 40 rc
- Center cutting end allows for plunge cutting like a drill into solid material
- M42 8% cobalt offers increased wear and heat resistance for abrasive and difficult materials, higher speeds and feeds and long life in production applications
- Tool coatings further enhance milling performance
- External coolant
-
UNSPSC23242511
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 44983 4613G Center Cutting Regular Length Roughing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, TiN Coated
Dichtomatik S70351 O-Ring, 351 Dash Number, 4.725 in ID x 5.145 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
4-LED ALUMINUM FLASHLIGHT - JWH815327 >
Dichtomatik N70407 O-Ring, 407 Dash Number, 2.225 in ID, Nitrile Rubber, 70 Shore A Durometer
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
OIL SEALS-NAT7781S>
Browning® 3694171 B5V® Type 5 Multiple Sheave, 1/2 to 1-15/16 in Split Taper Bore, 5.08 in OD, 3 Grooves, 4.9 in (5V)/4.6 in (A)/5.1 in (B) Dia Pitch, 2-7/16 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
