Diablo® Demo Demon™ DSPD4010 Spade Bit, 1/2 in, 6 in OAL, High Carbon Steel
Diablo® Demo Demon™ DSPD4010 Spade Bit, 1/2 in, 6 in OAL, High Carbon Steel
-
BrandDiablo®
-
UPC008925164418
-
Manufacturer Part NumberDSPD4010
-
CountryUSA
-
MaterialHigh Carbon Steel
-
Applicable MaterialsNail-Embedded Wood, Clean Wood, Hardwoods, Softwoods, Plywood
-
Shank Size1/4 in
-
Shank TypeHex
-
Size1/2 in
-
Overall Length6 in
- Up to 60X longer life in nail-embedded wood versus standard spade bits in nail-embedded wood applications
- Ultra-sharp DEMO-Edge™ cutting edge design delivers extreme durability and longer life
- Dura-Tip™ withstands nail hits while effortlessly pulling bit through wood
- Optimized curved paddle design quickly removes chip build-up and withstands nail hits for more holes per charge
- Impact Strong™ increases shank stability and durability
- Maximum performance in cordless and corded impact and drill drivers
Recently Viewed
Diablo® Demo Demon™ DSPD4010 Spade Bit, 1/2 in, 6 in OAL, High Carbon Steel
TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3/3e (5.5kW@400V). They can be used to create motor starters for almost any type of application. It provides a 24V DC coil with transient suppressor module, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.
7/8" -14" HAND TAPER TAP-PDTEK6514144T >
Sioux® 1410 Pistol Grip Drill, 1/4 in 3-Jaw/Key Chuck, 0.33 hp, 90 psi, 6.3 in OAL, 10 cfm Short Run Air Consumption
Sioux® 1410 Pistol Grip Drill, 1/4 in 3-Jaw/Key Chuck, 0.33 hp, 90 psi, 6.3 in OAL, 10 cfm Short Run Air Consumption
PT-2503-100-TC COILHOSE PNEUMATICS 5/32"-OD 3/32" POLY TUBE--RL/100'PRODUCTS
POLYURETHANE TUBING
O.D. X I.D.--5/32" X 3/32"
WALL THICKNESS--.031"
WP AT 75-DEGREES-F--176-PSI
TUBE LENGTH--100'
COLOR--TRANSPARENT CLEAR
Martin Hi-Cap® 8 3V 530 SK Solid Type A-1 Wedge Stock Sheave, 1/2 to 2-5/8 in QD® Bushed Bore, 5.3 in OD, 8 Grooves, 5-1/4 in Dia Pitch, 3.531 in W Face
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30,000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm, or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V, and 8V belts.
