ITM 715S61664 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
ITM 715S61664 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
-
BrandITM
-
UPC703652466162
-
Manufacturer Part Number715S61664
-
CountryUSA
-
FinishPolished
-
Point TypeSelf-Centering
-
MaterialCopper/Silver
-
TypeRotary
-
Cutting Depth4 in
-
Cutting Edge MaterialTungsten Carbide
-
Shank TypeSDS-Plus®
-
Drill Bit Size1/4 in
-
Overall Length6-1/2 in
- Rotary Hammer Drill
- Serrated had Geometry
- Self Centering Chisel Point
- Special Tungsten Carbide Tip
- Fastest Dust Removal
- Fastest Drilling Speeds
- Clean Round Holes
- Less Vibration
- Industrial Quality
-
Standards/ApprovalsANSI Specified
-
Catalog
Recently Viewed
ITM 715S61664 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
ITM 715S61664 Rotary Hammer Drill Bit, 1/4 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
8-MM X 9" LOOP T-HANDLE HEX KEYS - ALL58286 >
5/16" T-HANDLED HEX KEY - ALL56060>
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
MORSE® 25554 1751 Machine Countersink, 5/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
MORSE® 25554 1751 Machine Countersink, 5/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
Milwaukee® 3522-21 Cordless Self Leveling Cross Line and Plumb Points Laser, 100 ft Measuring, +/- 1/8 in at 33 ft Accuracy, 4 V, REDLITHIUM™ USB Rechargeable Battery, Reinforced Nylon/Rubber/Steel Housing
The MILWAUKEE® USB Rechargeable Green Cross Line and Plumb Points Laser is powered by REDLITHIUM™ USB, delivering all day runtime and uncompromised visibility. The high-intensity green beams keep the lines and plumb points visible up to 100' for fast, accurate leveling and alignment. The integrated magnetic bracket features micro control that pivots on point for faster set-up and point to point alignment at long distances. This cross line laser with plumb points features amplified rare earth magnets provide a strong hold onto metal surfaces with integrated screw and nail hang holes that make setup easy and efficient in any environment. Charge the REDLITHIUM™ USB Battery inside the laser via Micro USB or swap it out with additional REDLITHIUM™ USB Batteries for virtually no downtime. The Milwaukee USB Rechargeable Green Cross Line and Plumb Points Laser is covered by a two-year warranty.
