ITM 715S61464 Rotary Hammer Drill Bit, 7/32 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
ITM 715S61464 Rotary Hammer Drill Bit, 7/32 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
-
BrandITM
-
UPC703652321584
-
Manufacturer Part Number715S61464
-
CountryUSA
-
FinishPolished
-
Point TypeSelf-Centering
-
MaterialCopper/Silver
-
TypeRotary
-
Cutting Depth4 in
-
Cutting Edge MaterialTungsten Carbide
-
Shank TypeSDS-Plus®
-
Drill Bit Size7/32 in
-
Overall Length6-1/2 in
- Rotary Hammer Drill
- Serrated had Geometry
- Self Centering Chisel Point
- Special Tungsten Carbide Tip
- Fastest Dust Removal
- Fastest Drilling Speeds
- Clean Round Holes
- Less Vibration
- Industrial Quality
-
Standards/ApprovalsANSI Specified
-
Catalog
Recently Viewed
ITM 715S61464 Rotary Hammer Drill Bit, 7/32 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
ITM 715S61464 Rotary Hammer Drill Bit, 7/32 in Drill Bit, SDS-Plus® Shank, 4 in D Cutting, Tungsten Carbide Cutting Edge, 6-1/2 in OAL
SINGLE CYLINDER JIMMY PROOF DEADLOCK - JWH200614 >
Starrett® 196A1Z Universal Back Plunger Dial Indicator, 0.2 in, 0 to 100 Dial Reading, 0.001 in, 1.38 in Dial
The Starrett 196 Universal Back Plunger Dial Indicator features graduations to .001" and 0.02mm that handle by far the majority of jobs. Shank diameter is 1/4" (6.3mm). Antimagnetic models are also available - (inch reading) 196A6Z and 196B6. For full use, the operator first chooses the proper contact from the three hardened contact points that come with each model. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation. 0-100 with 3 Contact Points, Adapter, 4 Attachments in Case This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation.
Milwaukee® 48-70-0060 Water Collect Ring Assembly, For Use With Wet/Dry Vacuum Cleaner
For use with Milwaukee's diamond coring equipment.
Armstrong 69069 (often written as 69-069) most prominently refers to the Armstrong Tools 2.5 lb. Soft Face Dead Blow Hammer, an industrial-grade, non-marring, shot-filled hand tool designed to minimize rebound.
Safety is the number one priority on any job site. Sperry Instrument's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
