Drillco 350A005 3500 Imperial Plain Combined Drill and Countersink, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
-
BrandDrillco
-
UPC045996999068
-
Manufacturer Part Number350A005
-
CountryUSA|Canada
-
FinishUncoated
-
Point Angle60 deg
-
Point Diameter3/16 in
-
MaterialHSS
-
TypeImperial Plain
-
Series3500
-
Shank Size7/16 in
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialHSS
-
Included Angle60 deg
-
Drill Size - Decimal Inch0.1875 in
-
Drill Size - Fraction3/16 in
-
Body Diameter7/16 in
-
Overall Length2-3/4 in
- Made with premium grade HSS to last longer
- Plain type with single 60 chamfer
- Bright finish for added lubricity
- Double ended for twice the life
- Double ended for twice the life
-
UNSPSC20121600
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Drillco 350A005 3500 Imperial Plain Combined Drill and Countersink, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Browning® 1296615 T65L Automatic Torque Limiter, 1-15/16 in Finished Bore, 6-1/2 in OD, 4800 in-lb (1-Spring)/8800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
12" 410-6" 4PLY PNEU SWIVEL CASTER-MAT356FS4I >
Proto® J5885 Bar/T-Handle Sliding Drive Plug, 1 in Drive, 1 Pieces, For Use With 1AR23 Bar, J57102 and J57104 Socket Sets, Alloy Steel, Full Polished
The Starrett 449, 449M Series Micrometer Depth Gage with Non-Rotating Blade includes a .045" thick x 1/8" wide (1.2 x 3.2mm) blade that can be turned with the fingers and positioned at any angle relative to the base. In operation, the blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off. This is also ideal for slots and recesses as narrow as .045" (1.2mm). Furnished with a 2-1/2" (63mm) or a 4" (100mm) base. 0-6" Range, .001" Grad, 4" Base, 6 Rods, in Case.
3/8" STEEL NUMBER STAMP SETS-YNG08091 >
