Combined Drill & Countersinks
Drillco 350A002 3500 Imperial Plain Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Drillco 350A003 3500 Imperial Plain Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Drillco 350A004 3500 Imperial Plain Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Drillco 350A005 3500 Imperial Plain Combined Drill and Countersink, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Drillco 350C001A 3500C Imperial Combined Drill and Countersink, 3/64 in Drill - Fraction, 0.0469 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, Solid Carbide, Uncoated
Solid Carbide Combination Drill & Countersinks (Center Drills) have strong shanks and flutes, making them ideal in difficult materials. They may also be used in high production applications where tolerance, finish, and machine down-times are considered.
Drillco 350C002A 3500C Imperial Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, Solid Carbide, Uncoated
Solid Carbide Combination Drill & Countersinks (Center Drills) have strong shanks and flutes, making them ideal in difficult materials. They may also be used in high production applications where tolerance, finish, and machine down-times are considered.
Drillco 350C003A 3500C Imperial Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, Solid Carbide, Uncoated
Solid Carbide Combination Drill & Countersinks (Center Drills) have strong shanks and flutes, making them ideal in difficult materials. They may also be used in high production applications where tolerance, finish, and machine down-times are considered.
Drillco 350C004A 3500C Imperial Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, Solid Carbide, Uncoated
Solid Carbide Combination Drill & Countersinks (Center Drills) have strong shanks and flutes, making them ideal in difficult materials. They may also be used in high production applications where tolerance, finish, and machine down-times are considered.
Drillco 350E002 3500E Imperial Plain Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Drillco 350E003 3500E Imperial Plain Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Drillco 350E004 3500E Imperial Plain Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Drillco 350E006 3500E Imperial Plain Combined Drill and Countersink, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers.
Drillco 35E003A 3575E Imperial Long Length Plain Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers. Long Series for additional reach.
Drillco 35E004A 3575E Imperial Long Length Plain Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers. Long Series for additional reach.
Drillco 35E004C 3575E Imperial Long Length Plain Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Uncoated
When metal parts are machined on centers, as in turning or cylindrical grinding, it is always necessary to drill and countersink the center holes to serve as seats or bearings in the machine centers. Long Series for additional reach.
MORSEĀ® 25051 1495 Plain Combined Drill and Countersink, 1/32 in Drill - Fraction, 0.0312 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Bright
MORSEĀ® 53901 5495 Plain Standard Length Combined Drill and Countersink, 3/64 in Drill - Fraction, 0.0469 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, Solid Carbide, Bright
MORSEĀ® 25041 1495 Plain Combined Drill and Countersink, 3/64 in Drill - Fraction, 0.0469 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Bright
MORSEĀ® 25084 1498 Bell Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 120 deg Included Angle, 60 deg Point Angle, HSS, Bright
MORSEĀ® 53902 5495 Plain Standard Length Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, Solid Carbide, Bright
MORSEĀ® 53912 5495 Plain Standard Length Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 82 deg Included Angle, 82 deg Point Angle, Solid Carbide, Bright
MORSEĀ® 25042 1495 Plain Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Bright
MORSEĀ® 25012 1499 Long Plain Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, HSS, Bright
MORSEĀ® 53903 5495 Plain Standard Length Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, Solid Carbide, Bright
Recently Viewed
MAXCO Hi-MaxĀ® 16B Riveted ISO British Standard Roller Chain, Single Strand, 50ft Box, 1ā³ Pitch
W-236 1/4"-SHANK MOUNTED POINTS
AI Mode Conversation: morse cutting tools 70514
morse cutting tools 70514
The part number 70514 by Morse Cutting Tools corresponds to a Square Nose Carbide-Tipped Tool Bit.
Product Overview & Specifications
This single-point lathe tool bit is primarily used for external turning operations on manual or CNC lathes, specifically for chamfering, facing, turning, and making special forms.
ā¢ Tool Type: Square Nose Turning Tool Bit (often categorized under Style C/Square Nose)
ā¢ Shank Dimensions: 3/8" Width x 3/8" Height
ā¢ Overall Length (OAL): 2-1/2"
ā¢ Material / Grade: C2 (883 Grade) Carbide Tipped
ā¢ Application Compatibility: Engineered specifically for machining cast iron and various non-ferrous materials (such as aluminum, brass, or copper).
Are you looking for a local or online supplier to purchase this specific bit, or do you need a cross-reference or alternative tool style (such as an AR/AL style tool) for a different material?
Let's confirm it's in stock nearby
I'll check with nearby stores to make sure the item you need is available before you go
Check for me
Learn more
Try without personalization
ā¢
eBay
Morse 70514 C6 Grade C2 (883) Square Nose Carbide Tip ...
Square Nose Carbide Tip Tool Bit. For Chamfering, facing, turning and making special forms. For Use In Cast Iron and non-ferrous m...
chicago rawhide 13956
The part number 13956 (often branded as CR 13956 or SKF 13956) corresponds to a Type J-Flange Radial Shaft / Oil Seal originally manufactured by Chicago Rawhide (now owned by SKF).
Product Specifications
This specialized rotary shaft seal is built with an integrated installation stop flange featuring mounting holes and an auxiliary dust lip to keep contaminants out.
ā¢ Inside Diameter (Shaft Size): 1.375 in (1-3/8")
ā¢ Outside Diameter (Housing Bore): 4.577 in
ā¢ Width: 0.218 in (approx. 7/32")
ā¢ Lip Material: Nitrile Rubber (NBR)
ā¢ Casing design: Type J-Flange (Spring-loaded general-purpose rubber wit
4-AA FLASHLIGHT NYLON BELT POUCHES-UND14816 >
GreenleeĀ® 742BB Round Standard Knockout Punch Unit, 4-1/2 in Dia, 4 in
SharpieĀ® King Sizeā¢ 15001 Non-Washable Permanent Marker, 7 mm Chisel Felt Tip, Aluminum, Black
