Liquid Tight Flexible Non-Metallic Conduit
KAF-TECH 3/4" NON-METAL L/TITE CONDUIT KAF 3/4-NM
UltratiteĀ® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
KAF-TECH 1-1/2" NONMETAL L/TITE CONDUIT KAF 1-1/2-NM
SouthwireĀ® UltratiteĀ® 55094601 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1-1/2 in Trade, 1.575 to 1.6 in ID x 1.883 in OD, 50 ft L, PVC
KAF-TECH 1-1/4" N-METAL L/TITE CONDUIT KAF 1-1/4 -NM
Ultratite Liquidtight Flexible Nonmetallic Conduit is used for the installation and protection of electrical conductors. It protects the conductors where the conditions of installation, operation or maintenance require flexibility or protection from liquids, vapors, solids or weather. It is suitable for use in exposed or concealed installations and can be used for direct burial and encased in concrete.
KAF-TECH 1" NON-METAL L/TITE CONDUIT KAF 1-NM
The Southwire Company LiquidTite 1 in. x 100 ft. Non-Metallic Conduit is a flexible housing for electrical wire the provides impact protection in encased concrete or direct burial installations. This conduit is UL listed, CSA certified, green Spec and RoHS compliant. It helps protects electrical cables in burial and concrete applications.
KAF-TECH 1/2" NON-METAL L/TITE CONDUIT KAF 1/2-NM
UltratiteĀ® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
KAF-TECH 2" NON-METAL L/TITE CONDUIT KAF 2-NM
Ultratite Liquidtight Flexible Nonmetallic Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. It may be used for Motor circuits - for conductors of motor feeders, branch and control circuits. Where the conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. It may also be used in agricultural buildings under exposed or concealed installations.
SouthwireĀ® UltratiteĀ® 58046201 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.83 in OD, 100 ft L, PVC
This Southwire Ultratite 1/2 in. x 100 ft. Flexible Non-Metallic Conduit features a liquid-tight design ideal for protection from liquids, vapors, solids and weather. This product is ideal for installation, operation or maintenance that requires high flexibility. Made with a smooth metal interior for easy wire pulling.
Recently Viewed
1-POCKET DENIM WAIST APRON - GLVA2836D2 >
IKO BA2416ZOH Inch Series Caged Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 1-1/2 in Dia Bore, 1-7/8 in OD, 1 Row, 1 in W, 31100 N Dynamic/55400 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IrwinĀ® Vise-GripĀ® 165 4SPĀ® Standard Locking C-Clamp, Nickel Plated, 1-1/4 in D Throat, 1-5/8 in Jaw Opening, 4 in L Jaw, Heat Treated Alloy Steel
IrwinĀ® Vise-GripĀ® 165 4SPĀ® Standard Locking C-Clamp, Nickel Plated, 1-1/4 in D Throat, 1-5/8 in Jaw Opening, 4 in L Jaw, Heat Treated Alloy Steel
1/2" SWINGLINE STAPLES--BOX OF 1000-JWH354173 >
Ambore⢠12074 1384 Heavy Duty Jobber Length Drill Bit, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
Ambore⢠12074 1384 Heavy Duty Jobber Length Drill Bit, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
NIBCO 70-102-07 2-Piece Ball Valve, 3/8 in Nominal, FNPT End Style, Bronze Body, Standard Port, RMPTFE Softgoods, Domestic
The Apollo⢠70 series is the most widely used general purpose bronze ball valve on the market today. The 70-100 model is a 2-piece standard port ball valve featuring female NPT connections. Cast and machined in Apolloā¢'s South Carolina manufacturing plants, these valves provide trusted performance and a wide range of options.