Southwire® Ultratite® 58046201 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.83 in OD, 100 ft L, PVC
This Southwire Ultratite 1/2 in. x 100 ft. Flexible Non-Metallic Conduit features a liquid-tight design ideal for protection from liquids, vapors, solids and weather. This product is ideal for installation, operation or maintenance that requires high flexibility. Made with a smooth metal interior for easy wire pulling.
-
BrandSouthwire®
-
UPC032886895814
-
Manufacturer Part Number58046201
-
CountryUSA
-
Temperature Rating-30 to 80 deg C
-
MaterialPVC
-
Trade Size1/2 in
-
ColorGray
-
TypeType NM
-
Voltage Rating600 V AC
-
Inside Diameter0.622 to 0.642 in
-
Bend Radius6-1/2 in
-
Outside Diameter0.83 in
-
Length100 ft
- Where the conditions of installation operation or maintenance require flexibility or protection from liquids vapors solids or weather
- Gradual sweep
- No sharp edges
- Wont rust or corrode
- Where the conditions of installation operation or maintenance require flexibility or protection from liquids vapors solids or weather
| Cross-Reference Number |
|---|
| 515868 |
-
Alternative Part Number11758376
-
UNSPSC39131706
-
IDEA Index ID11758376
-
Package DescriptionEACH
-
Standards/ApprovalsANSI/NFPA 70 Article 356|ARRA Compliant|CSA Certified|REACH Compliant|RoHS Compliant|UL 1660|PROP65: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov|Buy American Act Compliant
-
WarrantyLifetime
-
Warranty Information
-
Specification Sheet
Recently Viewed
Southwire® Ultratite® 58046201 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.83 in OD, 100 ft L, PVC
This Southwire Ultratite 1/2 in. x 100 ft. Flexible Non-Metallic Conduit features a liquid-tight design ideal for protection from liquids, vapors, solids and weather. This product is ideal for installation, operation or maintenance that requires high flexibility. Made with a smooth metal interior for easy wire pulling.
RIDGID® 35170 Geared Ratchet Tube Bender, 0 to 180 deg Bend, Cast Aluminum
RIDGID® 35170 Geared Ratchet Tube Bender, 0 to 180 deg Bend, Cast Aluminum
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Silicon carbide general purpose wheel for stone, concrete, cast iron, ductile iron, masonry, materials, non-ferrous metals, brass, bronze, plastic, etc. Fast rate of cut. Good wheel life.
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Remke Tuff-Seal™ RSR-213 Straight Cord Grip Connector, 3/4 in Trade, 0.688 to 0.812 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
