Southwire® Ultratite® 55094801 Type NM Liquid Tight Flexible Non-Metallic Conduit, 2 in Trade, 2.02 to 2.045 in ID x 2.358 in OD, 50 ft L, PVC
Ultratite Liquidtight Flexible Nonmetallic Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. It may be used for Motor circuits - for conductors of motor feeders, branch and control circuits. Where the conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. It may also be used in agricultural buildings under exposed or concealed installations.
-
BrandSouthwire®
-
UPC032886042805
-
Manufacturer Part Number55094801
-
CountryUSA
-
Temperature Rating-30 to 80 deg C
-
MaterialPVC
-
Trade Size2 in
-
ColorGray
-
TypeType NM
-
Voltage Rating600 V AC
-
Inside Diameter2.02 to 2.045 in
-
Bend Radius22 in
-
Outside Diameter2.358 in
-
Length50 ft
- Permitted for Indoor and outdoor temporary power uses, portable industrial machinery and compressors, food processing and washdown facilities
- Constructed with class K stranded bare copper
- Cable is rated -40C to 105C, water, oil, and weather resistant
- UV sunlight resistant jacket
-
Alternative Part Number8872325
-
UNSPSC39131706
-
IDEA Index ID8872325
-
Package DescriptionEACH
-
Standards/ApprovalsUL 1660|CSA Certified|ANSI/NFPA 70 Article 356, REACH|RoHS Compliant|ARRA Compliant|Buy American Act Compliant|PROP65: This product contains material that, the State of California has determined, may cause reproductive harm. www.P65Warnings.ca.gov/product
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Southwire® Ultratite® 55094801 Type NM Liquid Tight Flexible Non-Metallic Conduit, 2 in Trade, 2.02 to 2.045 in ID x 2.358 in OD, 50 ft L, PVC
Ultratite Liquidtight Flexible Nonmetallic Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. It may be used for Motor circuits - for conductors of motor feeders, branch and control circuits. Where the conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. It may also be used in agricultural buildings under exposed or concealed installations.
Remke Tuff-Seal™ RSR-107 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 3, 4 Conductors, 0.375 to 0.438 in Cable Openings, Aluminum, Nickel Plated
Remke Tuff-Seal™ RSR-107 Form Size 2 Straight Cord Grip Connector With Locknut, O-Ring, 1/2 in Trade, 3, 4 Conductors, 0.375 to 0.438 in Cable Openings, Aluminum, Nickel Plated
The quality of cutting and grinding wheels depends on several factors - the grain (size, shape and quality) determines how aggressive a wheel is. The right mix of bonding resins, additives and fiberglass reinforcement determines the wheel life. metabo® cutting and grinding wheels are designed and manufactured in accordance with our most stringent specifications so that they, in combination with our power tools, achieve the best performance and productivity, saving time and money.
Aluminum oxide wheel for steel and other ferrous metals. Extremely fast rate of cut. Good wheel life. Flexibility for flush cutting.
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
Remke Tuff-Seal™ RSR-313 Straight Cord Grip Connector, 1 in Trade, 0.688 to 0.812 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
