Proto Tools 0" TO 10" STANDARD C-CLAMPS PRO J-410-S
Proto® J410S Deep Throat Standard Duty Welding C-Clamp, 5-3/8 in D Throat, 10 in Clamping, 0 to 10 in Jaw Opening, 3/4 in Screw
-
BrandProto®
-
UPC662679480332
-
Manufacturer Part NumberJ410S
-
CountryUSA
-
Throat Depth5-3/8 in
-
Clamping Capacity10 in
-
Clamping Pressure6200 lb
-
TypeDeep Throat Standard Duty Welding
-
Screw Size3/4 in
-
Anvil TypeFlat
-
Jaw Opening0 to 10 in
-
Body MaterialForged Alloy Steel
- Forcing screw and pad are plated with copper to resist welding spatter
- Hot forged for strength and hard use
- Forcing screw has heavy rolled acme thread allowing the screw to turn easily under pressure and is less susceptible to damage
- Forcing screw has a sliding T-handle and an impact resistant pad
- Deep throat scatter resistant full length screw
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 3R345 |
-
UNSPSC27112120
-
Package DescriptionEACH
-
Standards/ApprovalsCID A-A-429C
-
WarrantyLifetime
-
Catalog
Recently Viewed
Proto® J410S Deep Throat Standard Duty Welding C-Clamp, 5-3/8 in D Throat, 10 in Clamping, 0 to 10 in Jaw Opening, 3/4 in Screw
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. Inner Rings for machined-type needle roller bearings come in a variety of dimensions. Inch-type LRB series Inner Rings offer shaft diameters from 3/8 to 3-3/4 in and oil-hole versions for easier lubrication.
1" X 16" WIRE NAIL-JWH723051 >
SMALL-MEDIUM LIGHT WEIGHT BODY HARNESS-SAF1010SM >
6" OVAL LED WARNING LIGHTS-NASLEDQOA>
Browning® 1210806 Minimum Plain Bore Type 2 Spur Gear, 20 Diametral Pitch, 14.5 deg Pressure Angle, 3/8 in W Face, 80 Teeth, 4 in Dia Pitch, 1/2 to 1 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
