LPS 5-GAL MULTIPURP CLEANER/DEGREASER LPS 02705
-
BrandLPSĀ®
-
UPC078827027050
-
Manufacturer Part Number02705
-
CountryUSA|Canada
-
FormLiquid
-
ColorTurquoise/Greenish Blue
-
TypeMulti-Purpose
-
CompositionDipropylene Glycol Monomethyl Ether, Silicic Acid, Di-Sodium Salt, Tetrapotassium Pyrophosphate, Tripropylene Glycol Methyl Ether
-
VOC Content6.1%, 63 g/L, 0.53 lb/gal
-
Container Size5 gal
-
Container TypePlastic Pail
-
Net Weight5 gal
-
SeriesPrecision Clean
-
pH Range13
-
Specific Gravity1.05 to 1.09
-
Odor/ScentCitrus
- Super industrial strength removes tough stains and soils
- Water-based and biodegradable
- Does not contain butyl, chlorinated or petroleum solvents, bleach, ammonia, or abrasives
- Alkaline formula inhibits flash rusting
- Rinses clean
- Safe on all surfaces except magnesium
- Low VOCs and no chlorinated solvents
- Non-flammable
- <3 cSt viscosity
- 32 - 212 deg F temperature range
- 212 deg F initial boiling point
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 2C674 |
-
UNSPSC47131821
-
Package Description1/PK
-
Standards/ApprovalsNSFĀ® C1 Certified|Meets California Air Resources Board (CARB) VOC regulations for consumer products|Meets 2006 Ozone Transport Commission (OTC) model rules for consumer products|1/0/0 HMIS|HMIS III|NFPA|2009/08/25 CFIA Standard
Recently Viewed
GatesĀ® Power Transmission PowerGripĀ® HTDĀ® 234-3M-09 Synchronous Belt, 9 mm W, 234 mm OAL, 3 mm Pitch, 78 Teeth, Neoprene
PowerGripā¢ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
GatesĀ® Power Transmission Hi-PowerĀ® II PowerBandĀ® 4/B148 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 151 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Powerā¢ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
GatesĀ® Power Transmission PowerGripĀ® HTDĀ® 480-5M-15 Synchronous Belt, 15 mm W, 480 mm OAL, 5 mm Pitch, 96 Teeth, Neoprene
PowerGripā¢ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
United Abrasives-SAIT 1AX Blue Lineā¢ 57500 Portable Semi-Friable Coated Abrasive Belt, 3 in W x 24 in L, 24 Grit, Coarse Grade, Aluminum Oxide Abrasive, Cotton Backing
MorseĀ® 177504 MHS Advanced Hole Saw, 3-1/8 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
Morse, MHS50 (177504), 3-1/8" (79mm) diameter, bimetal hole saw is designed for general purpose use, cutting a wide range of materials including stainless steel, machinable metals, wood and plastic. Aggressive, positive rake tooth profile penetrates material easier and faster. Unique side slot increases leaverage access for various thicknesses of materials, easing slug removal. One (1) hole saw per box. Seperate arbor required, use MA35PSN (139052) or MA45PSN (139069). To optimize performance consider using Morse CUTLUBE (121408).
