CRC® 03120 Degreaser II Heavy Duty Non-Chlorinated Degreaser, 20 oz Aerosol Can, Slight Hydrocarbon Odor/Scent, Clear/White, Liquid Form
Non-chlorinated, zero VOC formula for cleaning where chlorinated solvents are not acceptable. High flashpoint of 180°F. Effectively removes soils with no residue build-up. Use caution on plastics.
-
BrandCRC®
-
UPC078254031200
-
Manufacturer Part Number03120
-
CountryUSA
-
FormLiquid
-
ColorClear/White
-
TypeHeavy Duty Non-Chlorinated
-
CompositionDistillates (Petroleum), Hydrotreated Light, Dipropylene Glycol Monopropyl Ether (dpmp), Dipropylene Glycol Monomethyl Ether Acetate, Carbon Dioxide
-
Container Size20 oz
-
Container TypeAerosol Can
-
Net Weight15 oz
-
SeriesDegreaser II
-
Specific Gravity0.839
-
Odor/ScentSlight Hydrocarbon
- Effectively removes soils with no residue build-up
- Zero VOC formula for cleaning where chlorinated solvents are not acceptable
- Non-conductive and non-corrosive high dielectric strength of 42,100 V safe on metal, nylon, plastic
- 180 deg F high flash point
- Ready to use dilution
- Heavy duty Degreaser II effectively removes soils and cleans surfaces without residue build-up
- Use caution on plastics
- All ingredients are either listed on the TSCA inventory or are exempt
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | LR5003120 |
| Grainger | 1D264 |
| Fastenal | 63258 |
-
Alternative Part Number1003398
-
UNSPSC47131820
-
IDEA Index ID8423755
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|RoHS Compliant|NSF K1/K2 Registered|SNAP Approved
-
Specification Sheet
Recently Viewed
CRC® 03120 Degreaser II Heavy Duty Non-Chlorinated Degreaser, 20 oz Aerosol Can, Slight Hydrocarbon Odor/Scent, Clear/White, Liquid Form
Non-chlorinated, zero VOC formula for cleaning where chlorinated solvents are not acceptable. High flashpoint of 180°F. Effectively removes soils with no residue build-up. Use caution on plastics.
594068 DO-IT BEST/MIDWEST CAN 5 GAL. PLASTIC AUTO SHUT OFF DIESEL FUEL CAN, YELLOW
FLAME SHIELD SAFETY SYSTEMS-DOUBLE PROTECTION LAYER, FLAME MITIGATION DEVICE PLUS VAPOR LOCKING SPOUT. QUICK-FLOW SPOUT INCLUDED
-JWH594068>
Weller® SP175 Marksman® Heavy Duty Soldering Iron, 120 V AC, 175 W, 5/8 in Dia Tip, 6 ft L Cord, Round Handle
Weller® SP175 Marksman® Heavy Duty Soldering Iron, 120 VAC, 175 W, 5/8 in Dia Tip, 6 ft L Cord, Round Grip Handle
Smith Bearing® CR-3/4-X Cylindrical Stud Type Needle Bearing Cam Follower, 3/4 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, 52100 Steel Roller
Screwdriver slot stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel. Most commonly used general purpose cam follower and available in sealed versions.
ALAN 12-THHN PINK STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE12THHNPNK >
