Browning® 1123207 Single Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth and Keyway, 3/4 in Dia Bore, 6.15 in OD, #60 Chain, 24 Teeth, 3/4 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
-
BrandBrowning®
-
UPC662289319527
-
Manufacturer Part Number1123207
-
CountryUSA
-
Pitch3/4 in
-
Pitch Diameter5.746 in
-
MaterialSteel
-
Chain Size#60
-
TypeSingle Strand Minimum Bore Type B
-
Hub Diameter4 in
-
Number of Teeth24
-
Keyway Size5/8 x 5/16 in
-
Outside Diameter6.15 in
-
Length Through Bore1-1/4 in
-
Bore Diameter3/4 in
- Larger hub diameter allows larger bore capacity
- Lasts longer than sprockets made from low carbon steel
- Maximum bore shown will accommodate standard keyways and setscrews over keyway
- Slightly larger bores are possible with no keyway, shallow keyway or setscrew at angle to keyway
- Hub projection on one side
- High quality, high carbon steel
- For use with 3/4 in pitch ANSI chain
-
Alternative Part Number60B24
-
UNSPSC31171900
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1123207 Single Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth and Keyway, 3/4 in Dia Bore, 6.15 in OD, #60 Chain, 24 Teeth, 3/4 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
Browning® 1109370 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 3/4 in Dia Bore, 5.907 in OD, #60 Chain, 23 Teeth, 3/4 in Pitch, Steel
Browning® 1109370 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 3/4 in Dia Bore, 5.907 in OD, #60 Chain, 23 Teeth, 3/4 in Pitch, Steel
Browning® 1109867 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 15/16 in Dia Bore, 6.59 in OD, #80 Chain, 19 Teeth, 1 in Pitch, Steel
Browning® 1109867 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 15/16 in Dia Bore, 6.59 in OD, #80 Chain, 19 Teeth, 1 in Pitch, Steel
Browning® 1885177 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Hardened Teeth and Keyway, 1-1/2 in Dia Bore, 8.52 in OD, #80 Chain, 25 Teeth, 1 in Pitch, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Browning® 1108166 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 1/2 in Dia Bore, 2.33 in OD, #40 Chain, 13 Teeth, 1/2 in Pitch, Steel
Browning® 1108166 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 1/2 in Dia Bore, 2.33 in OD, #40 Chain, 13 Teeth, 1/2 in Pitch, Steel
Split-blade screw-holding driver wedges into screw slot.
Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places.
Not designed for torquing or tightening.
Precision blade for use with small precision screws. Blade thickness of .028'' (1 mm) expanding to .045'' (1 mm).
Has pocket clip.
