Browning® 1123348 Single Strand Minimum Bore Type B Roller Chain Sprocket With Keyway, 1 in Dia Bore, 9.98 in OD, #60 Chain, 40 Teeth, 3/4 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
-
BrandBrowning®
-
UPC662289120079
-
Manufacturer Part Number1123348
-
CountryUSA
-
Pitch3/4 in
-
Pitch Diameter9.559 in
-
MaterialSteel
-
Chain Size#60
-
TypeSingle Strand Minimum Bore Type B
-
Hub Diameter4-1/4 in
-
Number of Teeth40
-
Keyway Size5/8 x 5/16 in
-
Outside Diameter9.98 in
-
Length Through Bore1-1/4 in
-
Bore Diameter1 in
- Larger hub diameter allows larger bore capacity
- Lasts longer than sprockets made from low carbon steel
- Maximum bore shown will accommodate standard keyways and setscrews over keyway
- Slightly larger bores are possible with no keyway, shallow keyway or setscrew at angle to keyway
- Hub projection on one side
- High quality, high carbon steel
- For use with 3/4 in pitch ANSI chain
-
Alternative Part Number60B40
-
UNSPSC31171900
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified
-
Warranty1 Year
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Browning® 1123348 Single Strand Minimum Bore Type B Roller Chain Sprocket With Keyway, 1 in Dia Bore, 9.98 in OD, #60 Chain, 40 Teeth, 3/4 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
Browning® 1879063 Single Strand Finished Bore Type 1 Roller Chain Sprocket With Hardened Teeth and Keyway, 7/8 in Dia Bore, 1.989 in OD, #35 Chain, 15 Teeth, 3/8 in Pitch, Steel
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Ingersoll Rand 117 Standard Air Hammer, 0.69 in Dia Bore, 2000 bpm, 3.5 in L Stroke
The 117 standard air hammer has a longer piston stroke than other hammers in the series. It is designed for exhaust work, bolt cutting, and front end work.
2-3/8" COPPER ALLIGATOR CLIPS (NON-INSULATED)
Apex® 834-TX-50 Drive Bit, T50 Torx® Point, 2.625 in OAL, Steel
FYH® UCX08 24 UCX Cylindrical Pillow Block Unit, 40 mm Dia Bore, 2-5/8 in W, 34.1 kN Dynamic/21.3 kN Static Load
FYH® UCX08 24 UCX Cylindrical Pillow Block Unit, 40 mm Dia Bore, 2-5/8 in W, 34.1 kN Dynamic/21.3 kN Static Load
