Browning 18-T MPB CHAIN COUPLING SPROCKETS BRW C-50-B-18
BrowningĀ®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
-
BrandBrowningĀ®
-
UPC662289289516
-
Manufacturer Part Number1122720
-
CountryUSA
-
Pitch5/8 in
-
Pitch Diameter3.599 in
-
MaterialSteel
-
Chain Size#50
-
TypeSingle Strand Minimum Bore Type B
-
Hub Diameter2-7/8 in
-
Number of Teeth18
-
Keyway Size1/2 x 1/4 in
-
Outside Diameter3.92 in
-
Length Through Bore1 in
-
Bore Diameter5/8 in
- Larger hub diameter allows larger bore capacity
- Lasts longer than sprockets made from low carbon steel
- Maximum bore shown will accommodate standard keyways and setscrews over keyway
- Slightly larger bores are possible with no keyway, shallow keyway or setscrew at angle to keyway
- Hub projection on one side
- High quality, high carbon steel
- For use with 5/8 in pitch ANSI chain
-
Alternative Part Number50B18
-
UNSPSC31171900
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified
-
Warranty1 Year
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
BrowningĀ®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
BrowningĀ® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
1-3/4" X 3/8" VINYL COATED CLAMPS-GVIRBC13/4X3/8 >
WeilerĀ® 41009 Marking Brush, 9/32 in Bristle Brush
LittelfuseĀ® POWR-GARDĀ® JLLS150 Current Limiting Fast Acting Fuse, 150 A, 600 V AC/300 V DC, 20/200 kA Interrupt, T Class, Cartridge Body
Space saving Class T fuses are the most compact fuses available in ratings above 30 A - less than one-third the size of comparable Class R fuses. When rated in accordance with the NEC, Class T fuses provide Fast Acting overload and short circuit protection for non-inductive circuits and equipment. Used in inductive circuits, the ampere rating of Class T fuses must be increased to prevent opening on inrush currents. In such instances, Class T fuses may provide only short circuit protection.
Amboreā¢ 18182 8080 Heavy Duty Jobber Length Drill Set, 1/16 in Min Drill Bit, 1/2 in Max Drill Bit, 135 deg Drill Point Angle, 29 Pieces, HSS, Black/Gold
Amboreā¢ 18182 8080 Heavy Duty Jobber Length Drill Set, 1/16 in Min Drill Bit, 1/2 in Max Drill Bit, 135 deg Drill Point Angle, 29 Pieces, HSS, Black/Gold
