Browning® 1108794 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 in Dia Bore, 4.12 in OD, #50 Chain, 19 Teeth, 5/8 in Pitch, Steel
Browning® 1108794 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 in Dia Bore, 4.12 in OD, #50 Chain, 19 Teeth, 5/8 in Pitch, Steel
-
BrandBrowning®
-
UPC662289241361
-
Manufacturer Part Number1108794
-
CountryUSA
-
Pitch5/8 in
-
Pitch Diameter3.797 in
-
MaterialSteel
-
Chain Size#50
-
TypeSingle Strand Plate Type A
-
Number of Teeth19
-
Outside Diameter4.12 in
-
Length Through Bore0.343 in
-
Bore Diameter5/8 in
- Solid plate
- No hub projection
- High quality, high carbon steel
- Browning® offers type A plate steel sprockets in single strands
- Lasts longer than sprockets made from low carbon steel
- For use with 5/8 in pitch ANSI chain
-
Alternative Part Number50A19
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Specification Sheet
-
Warranty Information
Recently Viewed
Browning® 1108794 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 in Dia Bore, 4.12 in OD, #50 Chain, 19 Teeth, 5/8 in Pitch, Steel
Browning® 1108794 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 5/8 in Dia Bore, 4.12 in OD, #50 Chain, 19 Teeth, 5/8 in Pitch, Steel
PE064-100K by Coilhose | Tubing | 3/8" OD x .250" ID | .062" Wall thickness | Black | Polyethylene | 100ft
604909 DO-IT-BEST/LANDMARK COIL CLEEN 32 OZ. READY TO USE TRIGGER SPRAY AIR CONDITIONER COIL CLEANER
INSTANTLY REMOVES DIRT AND GRIME WHICH INCREASES COOLING EFFICIENCY. READY TO USE FORMULA. 32 OZ.
-JWH604909 >
Browning 15-TOOTH #40-1 CHAIN SPROCKETS BRW H-4015 X 1-1/8
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Littelfuse® SAO015 Type S Plug Fuse Adapter, For Use With TOO, TLO, SOO and SLO Series Plug Fuse, 15 A
The national electric code now permits Edison base fuses to be used only for replacements in existing installations and then, only when there is no evidence of over fusing or tampering. All new Edison based fuse holders must have type S fuse adapters installed before they are placed in service. Designed to prevent installation of wrong size fuses, type S adapters (SAO series) screw into Edison base fuse holders so they may accept type S fuses. Once installed the adapters cannot be removed. To prevent shunting of open fuses or over fusing and to reduce nuisance fuse opening, it is recommended that SAO adapters with properly rated SLO or SOO series fuses be installed in all Edison base fuse holders.
NITRILE DISP XTREME X3 GLV--BX/100-GLVX346100L>
