Browning 23-TOOTH #35-1 CHAIN SPROCKETS BRW H-3523 X 3/4
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
-
BrandBrowning®
-
UPC662289982752
-
Manufacturer Part Number1879279
-
CountryUSA
-
Pitch Diameter2.754 in
-
MaterialSteel
-
Chain Size#35
-
TypeSingle Strand Finished Bore Type 1
-
Hub Diameter2.203 in
-
Number of Teeth23
-
Outside Diameter2.95 in
-
Length Through Bore7/8 in
-
Bore Diameter3/4 in
- Furnished with standard keyway on centerline of tooth and hollow head setscrew over keyway
- In-stock hardened sprockets are warranted to last at least twice as long as the standard (unhardened) mild steel sprockets they replace
- For use with 3/8 in pitch ANSI chain
- Additional setscrew at 90 and 180 deg to keyway
-
Alternative Part NumberH3523X3/4
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
2" FLANGED Y-STRAINER CAP
INSULATED PORCELAIN WIRE HOLDERS-JWH519095>
Oatey® 33911 Half Pipe Clamp With Barbed Nail, 3/4 in Pipe, Polypropylene, Import
Oatey® Half Clamp Pipe Clamps with Nails are designed for securing copper, PEX and CPVC piping to mounting surfaces. Made of corrosion resistant polypropylene, these pipe support clamps feature a pre-loaded, rust resistant nail for easy installation and a ribbed design for noise reduction. Oatey products have earned the trust of plumbing professionals for over 100 years.
McGill® 0000800000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 1/2 in ID x 0.7493 in OD, 1.01 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
MORSE® 18166 8070 Type J NAS-907 Heavy Duty Jobber Length Drill Set, 1/16 in Min Drill Bit, 1/2 in Max Drill Bit, 135 deg Drill Point Angle, 29 Pieces, M42 HSS-Co 8, Bright
MORSE® 18166 8070 Type J NAS-907 Heavy Duty Jobber Length Drill Set, 1/16 in Min Drill Bit, 1/2 in Max Drill Bit, 135 deg Drill Point Angle, 29 Pieces, M42 HSS-Co 8, Bright

