Browning® 1108430 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 23/32 in Dia Bore, 6.65 in OD, #40 Chain, 40 Teeth, 1/2 in Pitch, Steel
Browning® 1108430 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 23/32 in Dia Bore, 6.65 in OD, #40 Chain, 40 Teeth, 1/2 in Pitch, Steel
-
BrandBrowning®
-
UPC662289317820
-
Manufacturer Part Number1108430
-
CountryUSA
-
Pitch1/2 in
-
Pitch Diameter6.373 in
-
MaterialSteel
-
Chain Size#40
-
TypeSingle Strand Plate Type A
-
Number of Teeth40
-
Outside Diameter6.65 in
-
Length Through Bore0.284 in
-
Bore Diameter23/32 in
- Solid plate
- No hub projection
- High quality, high carbon steel
- Browning® offers type A plate steel sprockets in single strands
- Lasts longer than sprockets made from low carbon steel
- For use with 1/2 in pitch ANSI chain
-
Alternative Part Number40A40
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Warranty Information
Recently Viewed
Browning® 1108430 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 23/32 in Dia Bore, 6.65 in OD, #40 Chain, 40 Teeth, 1/2 in Pitch, Steel
Browning® 1108430 Single Strand Plate Type A Roller Chain Sprocket With Hardened Teeth, 23/32 in Dia Bore, 6.65 in OD, #40 Chain, 40 Teeth, 1/2 in Pitch, Steel
MSA V-Gard® 10115836 Contoured Visor, Clear, Polycarbonate, 8 in H x 17 in W x 0.04 in THK Visor, For Use With MSA V-Gard® Frames and Headgears, ANSI/ISEA Z87.1-2010, CSA Z94.3, EN 166 (2C-1.2 MSA 1B), AS/NZS 1337
MSA polycarbonate visors reliably protect against impact, chemical splash and ultraviolet radiation. They are the perfect solution for general and basic applications and can be worn with helmet-mounted earmuffs.
Koyo TRB-2435 Double Direction Thrust Washer, 38.1 mm ID x 55.55 mm OD, 1.6 mm W
Ideally, a thrust washer should be stationary with respect to and piloted by its supporting or backing member whether or not this is an integral part of the shaft or housing. There should be no rubbing action between the thrust washer and any other machine member. The economics of design, however, often preclude these ideal conditions and thrust washers must be employed in another manner. In such cases, design details should be determined in consultation with your representative.
Combination Wrench, 1 in, Chrome Vanadium Steel, Polished Chrome
5/8" CONVOLUTED SLIT WIRE LOOM (FT)-GVIALZC5/8 >
Plumb® 11440 Autograf Premium Claw Hammer, 13 in OAL, Polished Face Surface, 16 oz Steel Head, Rip Claw, Hickory Wood Handle
Plumb® 11440 Autograf Premium Claw Hammer, 13 in OAL, Polished Face Surface, 16 oz Steel Head, Rip Claw, Hickory Wood Handle
