Browning 24-TOOTH #60-1 CHAIN SPROCKETS BRW H-6024 X 1.3/16
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
-
BrandBrowning®
-
UPC662289986361
-
Manufacturer Part Number1882869
-
CountryUSA
-
Pitch Diameter5.746 in
-
MaterialSteel
-
Chain Size#60
-
TypeSingle Strand Finished Bore Type 1
-
Hub Diameter4.016 in
-
Number of Teeth24
-
Outside Diameter6.15 in
-
Length Through Bore1-1/4 in
-
Bore Diameter1-3/16 in
- Furnished with standard keyway on centerline of tooth and hollow head setscrew over keyway
- In-stock hardened sprockets are warranted to last at least twice as long as the standard (unhardened) mild steel sprockets they replace
- For use with 3/4 in pitch ANSI chain
- Additional setscrew at 90 deg to keyway
-
Alternative Part NumberH6024X 1 3/16
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning 24-TOOTH #60-1 CHAIN SPROCKETS BRW H-6024 X 1.3/16
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
Browning® Classical Gripbelt® 1042688 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 14-3/4 in OD, 14.2 in (A)/14.7 in (B) Dia Pitch, 7/8 in W Face
ITM TX05025 Bit Screwdriver, #T25 Point, 2 in OAL
Gator® GatorGrit 3277 Coated Sanding Sheet, 11 in L x 9 in W, 80 Grit, Garnet Abrasive, Paper Backing
Gator® GatorGrit 3277 Coated Sanding Sheet, 11 in L x 9 in W, 80 Grit, Garnet Abrasive, Paper Backing
Milwaukee® 48-20-6713 Drill Bit, 5/8 in Drill Bit, 5/8 in Shank SDS-Plus Shank, 10 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
Powerful EH38 thermostatically controlled device from Easy Heat. Self-regulating heating cables, such as Easy Heat's Freeze Free™ generally do not require thermostatic control: the heat output and energy usage of these cables are reduced as temperatures rise. Without on/off control, however, these cables are energized all the time. When installed, the convenient EH38 automatically energizes the cable at temperatures lower than 38 deg F/3 deg C and then shuts off power when the temperature rises to 50 deg F/10 deg C. Further, the EH38 extends cable life by reducing operation time, especially in the summer, while eliminating the hassle of having to unplug the cable each spring. Most importantly, it reduces the risks of frozen pipes if the cable is not plugged in when the temperature falls. Installation is easy. Simply unplug the heating cable, plug the EH38 into the receptacle and then insert the heating cable plug into the EH38. The handy EH38 can also be used to control other electrical devices that need to be activated when temperatures approach the freezing point.
