Martin 60-T DRIVE SPROCKETS FOR #41 CHAIN MAT 41-A-60
A Plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
-
BrandMartin
-
UPC697950009636
-
Manufacturer Part Number41A60
-
CountryUSA|Canada
-
Pitch1/2 in
-
Pitch Diameter9.5537 in
-
MaterialSteel
-
Chain Size#41
-
TypeType A Single Strand Solid Reboreable
-
Number of Teeth60
-
Outside Diameter9.841 in
-
Length Through Bore0.227 in
-
Bore Diameter0.71875 to 9.011 in
- Precise machining and processes ensure consistent finish and high quality
-
UNSPSC31171901
-
Standards/ApprovalsANSI Specified|B29.1 - 1975
-
WarrantyLimited
-
Specification Sheet
Recently Viewed
A Plates are flat sprockets with no hub extension on either side. They can be altered for your application with bolt holes, custom bores, hardened teeth or special hubs welded to them.
Dichtomatik 75102174 O-Ring, 252 Dash Number, 5.234 in ID x 5.512 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
FYH® NAP311 35E NAP Normal Duty Pillow Block Unit, 2-3/16 in Dia Bore, 3-1/16 in Base to Bore Centerline, 12-7/32 in OAL 6-1/8 in OAH
FYH® NAP311 35E NAP Normal Duty Pillow Block Unit, 2-3/16 in Dia Bore, 3-1/16 in Base to Bore Centerline, 12-7/32 in OAL 6-1/8 in OAH
Proto® JT15314R Screwdriver, T15 Star/Torx® Point, Alloy Steel Shank, 7 in OAL, Black Oxide/Polished Chrome, ASME B107.15
Browning® 1069301 Split Taper Bushing, 9/16 in Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Wilton 1208, Cam Action Drill Press Vise, 8" Jaw Width, 8-3/16" Jaw Opening
With the Wilton Cam Action Drill Press, a simple push or pull on the center bar knob sets the jaw in position
