Browning® 1297233 Single Strand Idler Sprocket With Hardened Teeth, 1/2 in Dia Bore, 1-3/4 in OD, 35 Chain, 13 Teeth, 3/8 in Pitch, Steel
Browning® 1297233 Single Strand Idler Sprocket With Hardened Teeth, 1/2 in Dia Bore, 1-3/4 in OD, 35 Chain, 13 Teeth, 3/8 in Pitch, Steel
-
BrandBrowning®
-
UPC662289164479
-
Manufacturer Part Number1297233
-
CountryUSA
-
Pitch3/8 in
-
MaterialSteel
-
Chain Size35
-
TypeSingle Strand
-
Hub Diameter1-5/32 in
-
Number of Teeth13
-
Keyway Size1/8 x 1/16 in
-
Outside Diameter1-3/4 in
-
Length Through Bore3/4 in
-
Bore Diameter1/2 in
- For use with drive tighteners
- Cast iron
- All Browning stock idlers furnished with needle bearings have retainers that insure minimum internal friction and wear by separating the needle rollers
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Adapter plate for couplings
- Cast iron
- All Browning stock idlers furnished with needle bearings have retainers that insure minimum internal friction and wear by separating the needle rollers
-
Alternative Part NumberHN35B13 IDLER
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
Recently Viewed
Browning® 1297233 Single Strand Idler Sprocket With Hardened Teeth, 1/2 in Dia Bore, 1-3/4 in OD, 35 Chain, 13 Teeth, 3/8 in Pitch, Steel
Browning® 1297233 Single Strand Idler Sprocket With Hardened Teeth, 1/2 in Dia Bore, 1-3/4 in OD, 35 Chain, 13 Teeth, 3/8 in Pitch, Steel
Proto® TorquePlus™ J1215MES Combination Wrench, 15 mm Wrench, 12 Points, 15 deg Offset, 4-11/16 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
XL-PITCH X 10" TIMING BELTS-BRW100XL037>
Irwin® Hanson® 9503ZR Hexagonal Pipe Taper Die, 1/4-18 Thread NPT Thread, High Carbon Steel
Irwin® Hanson® 9503ZR Hexagonal Pipe Taper Die, 1/4-18 Thread NPT Thread, High Carbon Steel
BELL® 5175-0 Weatherproof Blank Cover, 4-1/2 in L 4-1/2 in W 1/4 in D, Blank/Flat Cover, Die Cast Aluminum
BELL® 5175-0 Weatherproof Blank Cover, 4-1/2 in L x 4-1/2 in W, Die Cast Aluminum
Browning® 1305168 Stock Shear Pin, 13/32 in Dia Neck, 2-7/16 in (SHQ1)/2-5/8 in (SHR1) OD, For Use With Model SHQ1/SHR1 Hub, 33530 in-lb Torque, Steel
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered.
