Browning 28-TOOTH #60-2-CHAIN DBL/SPROCKETS BRW D-60-Q-28
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
-
BrandBrowning®
-
UPC662289179459
-
Manufacturer Part Number1174739
-
CountryUSA
-
Pitch Diameter6.699 in
-
MaterialSteel
-
Chain Size60
-
TypeDouble Strand Type 12
-
Hub Diameter4-1/8 in
-
Number of Teeth28
-
Outside Diameter7.106 in
-
Length Through Bore2.8281 in
-
Bore Diameter3/4 to 2-11/16 in
- Split Taper Bushing are available in popular Inch, Metric and Spline bore
-
Alternative Part NumberD60Q28
-
UNSPSC31171901
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning 28-TOOTH #60-2-CHAIN DBL/SPROCKETS BRW D-60-Q-28
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
7/16" FULL POLISH COMBINATION FLARE NUT WRENCH
Browning® 1296367 T35L Automatic Torque Limiter, 5/8 in Finished Bore, 3-1/2 in OD, 1800 in-lb (1-Spring)/3000 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
1-1/2" LB" ACCESS FITTING-JWH512056 >
1-LB #6013 3/32" WELDING RODS-FOR30301 >
1/4" X 3-1/4" USS GR-8 Hex Head Capscrew
