Browning 14-TOOTH #50 CHAIN DOUBLE SPROCKET BRW D-50-TB-A-14
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
-
BrandBrowning®
-
UPC662289604692
-
Manufacturer Part Number3748076
-
CountryUSA
-
Pitch Diameter2.809 in
-
MaterialSteel
-
Chain Size50
-
TypeDouble Strand Type 3
-
Number of Teeth14
-
Outside Diameter3.113 in
-
Length Through Bore7/8 in
-
Bore Diameter1/2 to 1 in
- This product has the Browning® exclusive twice the life guarantee
- Compact design
- Hardened teeth at no extra cost, drives sizes up to 30 teeth on 40 through 160 chain
- Flush fit, less space on shaft and no protruding flange
- Setscrew or cap screw acts as external key
- For use with 5/8 in pitch ANSI chain
-
Alternative Part NumberD50TBA14
-
UNSPSC31171901
-
Package Description1/PK
-
Warranty1 Year
-
Warranty Information
-
Specification Sheet
Recently Viewed
Browning 14-TOOTH #50 CHAIN DOUBLE SPROCKET BRW D-50-TB-A-14
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
1/2" -13" X 36" USS LEFT HANDED THREADED ROD-NBS9790500300 >
Klein® 1550-7 2-Blade Pocket Knife, Carbon Steel Screwdriver Tip/Sheepfoot Blade, 2-1/2 in, 2-3/8 in L Blade, Lock Opening
Klein® 1550-7 2-Blade Pocket Knife, Carbon Steel Screwdriver Tip/Sheepfoot Blade, 2-1/2 in, 2-3/8 in L Blade, Lock Opening
Proto® TorquePlus™ J3772 Flare Nut Wrench, Satin, Imperial, 5/8 x 11/16 in Double End Wrench, 6 Points, 8-3/4 in OAL, ASME B107.100
110-GALLON CAPACITY 14-GAUGE STEEL FUEL TRANSFER TANK - WTG360301>
Browning 17-TOOTH 50-CHAIN D/S SPROCKETS BRW DS-50-H-17
Browning® stock double single sprockets with Split-Taper® bushings are for use with two single strand chains, normally one drive chain and one driven chain as on roll case drives or live roller conveyor drives. They are made of steel, have hardened teeth and are ready to use right off the shelf. No reworking is necessary since they use Browning® Split-Taper® bushings.
