Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
-
BrandBrowning®
-
UPC662289610907
-
Manufacturer Part Number3748506
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating1300 in-lb
-
Screw Size1/4 x 1/2 in
-
Number of Bolt Holes2
-
Barrel Diameter1.511 in
-
Keyway Size3/16 x 3/32 in
-
Bolt Circle Diameter1-29/64 in
-
Bore Diameter3/4 in
-
Overall Length7/8 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
-
Alternative Part Number1108X3/4
-
UNSPSC31163205
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Moline Bearing 19341315 Type E Pillow Block Bearing, 3-15/16 in Dia Bore, 11-1/2 in L Bolt Center-to-Center, 4-1/4 in Base to Bore Centerline, 15-1/4 in OAL x 8-1/2 in OAH
Made of Cast Iron, this Solid Type E 4-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 3 15⁄16 in (3.9375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, Teflon and Steel, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Weiler® 17901 Concave Wheel Brush, 1-1/2 in Dia Brush, 0.006 in Dia Crimped Filament/Wire
Weiler® 17901 Concave Wheel Brush, 1-1/2 in Dia Brush, 0.006 in Dia Crimped Filament/Wire
MORSE® 44175 4551 Center Cutting Long Length Single End End Mill, 5/8 in Dia Cutter, 2-1/2 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 4-5/8 in OAL, Bright
Dichtomatik S70113 O-Ring, 113 Dash Number, 0.549 in ID x 0.755 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
2.756" X 3.937" X .393" OIL SEALS -CHI27770 >
