Weiler® 17901 Concave Wheel Brush, 1-1/2 in Dia Brush, 0.006 in Dia Crimped Filament/Wire
Weiler® 17901 Concave Wheel Brush, 1-1/2 in Dia Brush, 0.006 in Dia Crimped Filament/Wire
-
BrandWeiler®
-
UPC012382179014
-
Manufacturer Part Number17901
-
CountryUSA|Canada
-
Filament/Wire Diameter0.006 in
-
Filament/Wire TypeCrimped
-
Fill MaterialSteel
-
Maximum Speed20000 rpm
-
Trim Length3/8 in
-
TypeConcave
-
Attachment TypeStem
-
Shank Diameter1/4 in
-
Brush Diameter1-1/2 in
- Saucer-shaped radial wheels permanently mounted on a 1/4 in stem to provide flexible brushing action for addressing corners and hard-to-reach areas
- Crimped wire wheels with a permanently-attached 1/4 in stem or shank are primarily intended for use on high speed die grinders
- Although they can also be mounted onto a drill, the speed and power of that tool will light weight the effectiveness of the brush
- Featuring Weiler's solid ring construction, these radial wheels are available in heat-treated steel, type 302 stainless steel and brass wire
-
UNSPSC31171805
-
Package Description10/PK
-
Standards/ApprovalsANSI B165.1|CSA Approved
Recently Viewed
Weiler® 17901 Concave Wheel Brush, 1-1/2 in Dia Brush, 0.006 in Dia Crimped Filament/Wire
Weiler® 17901 Concave Wheel Brush, 1-1/2 in Dia Brush, 0.006 in Dia Crimped Filament/Wire
MORSE® 44175 4551 Center Cutting Long Length Single End End Mill, 5/8 in Dia Cutter, 2-1/2 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 4-5/8 in OAL, Bright
Dichtomatik S70113 O-Ring, 113 Dash Number, 0.549 in ID x 0.755 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
2.756" X 3.937" X .393" OIL SEALS -CHI27770 >
Browning® 3748548 Taper Lock Bushing, 1 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 3748548 Taper Lock Bushing, 1 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 3694650 B5V® Type 4 Arm Multiple Sheave, 1/2 to 2-7/16 in Split Taper Bore, 15.68 in OD, 4 Grooves, 15.2 in (A)/15.7 in (B)/15.5 in (5V) Dia Pitch, 3-5/32 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
