Browning 1-7/16"-ID 2012-STYLE TL BUSHINGS BRW 2012 X 1-7/16
Browning® 3749363 Taper Lock Bushing, 1-7/16 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
-
BrandBrowning®
-
UPC662289614295
-
Manufacturer Part Number3749363
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating7150 in-lb
-
Screw Size7/16 x 7/8 in
-
Number of Bolt Holes2
-
Barrel Diameter2-3/4 in
-
Keyway Size3/8 x 3/16 in
-
Bolt Circle Diameter2-5/8 in
-
Bore Diameter1-7/16 in
-
Overall Length1-1/4 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
- Size 2012 bushing
- Mounts flush in products no protruding flanges to interfere with the drive
- Key to key drive cap screws act as an external key
- 1-1/2 in/ft taper on barrel since this is a non-self locking taper it provides ease of installation and removal of products from the shaft
-
Alternative Part Number2012X 1 7/16
-
UNSPSC31163205
-
Package Description1/PK
-
Warranty1 Year
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Browning® 3749363 Taper Lock Bushing, 1-7/16 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Dichtomatik N70337 O-Ring, 337 Dash Number, 2.975 in ID x 3.395 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik N70021 O-Ring, 021 Dash Number, 0.926 in ID x 1.066 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Browning® 3749801 Taper Lock Bushing, 7/8 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
5/16" STEEL BALLS-SSB516 >
Jones Stephens™ Drain King® D18750 Inflatable Test Plug, 3 to 6 in Pipe, 8-11/16 in L, Domestic
Jones Stephens™ Drain King® D18750 Inflatable Test Plug, 3 to 6 in Pipe, 8-11/16 in L, Domestic
