Browning 1/2"-ID 1108-STYLE TL BUSHINGS BRW 1108 X 1/2
Browning® 3748464 Taper Lock Bushing, 1/2 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
-
BrandBrowning®
-
UPC662289610815
-
Manufacturer Part Number3748464
-
CountryUSA
-
Taper1-1/2 in/ft
-
MaterialSteel
-
Torque Rating1300 in-lb
-
Screw Size1/4 x 1/2 in
-
Number of Bolt Holes2
-
Barrel Diameter1.511 in
-
Keyway Size1/8 x 1/16 in
-
Bolt Circle Diameter1-29/64 in
-
Bore Diameter1/2 in
-
Overall Length7/8 in
-
Suitable For Use WithBrowning® Sprockets and HPT Chain Synchronous Belt Drives
-
Alternative Part Number1108X1/2
-
UNSPSC31163205
-
Package Description1/PK
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Browning® 3748464 Taper Lock Bushing, 1/2 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Diablo® DS1208CF3 Reciprocating Saw Blade, 12 in L, 8 TPI
Koyo IR-2424 Inch Series Regular Width Inner Ring, 1-1/2 in ID x 1-3/4 in OD, 1.515 in OAW, For Use With Inch Series Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
DOUBLE OPEN FACE BALL BEARING-IDCR14 >
Jacobs® 30605 L-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: KGA, For Use With 1/4 in and 3/8 in Multi-Craft® Chucks, Soft Steel
Jacobs® 30605 L-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: KGA, For Use With 1/4 in and 3/8 in Multi-Craft® Chucks, Soft Steel
10" DECK BRUSH WITH 3" PALMYRA TRIM - MAG1103 >
