P-4-B-62-0USAF-307-TT Dodge® 039417 Type USAF Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 13-1/4 to 14-1/2 in L Bolt Center-to-Center, 5-1/4 in Base to Bore Centerline, 16-1/2 in OAL x 10-1/4 in OAH
USAF housing features including solid cast feet to increase strength, large capacity oil sump with two oversized drain holes adaptable to circulating oil systems, cast in oil return slots to keep lubricants in, oil-equalization passage allowing pillow block to be drained completely from either side, offset dowels with matched numbers on cape and base to simplify correct assembly, cast-in dimples to locate drill holes for lube fittings, vents, sensors and mounting modifications, housing base threaded to accept grade 5 cap bolts for added strength and pry slots between the cap and base to allow easy separation. Utilizes E design spherical roller bearing insert for higher load carrying capacity. USAF and USDAF match industry standard SAF and SDAF mounting dimensions.
-
BrandDodge®
-
UPC782475808106
-
Manufacturer Part Number039417
-
CountryUSA
-
Load Capacity96500 lb Dynamic/106000 lb Static
-
Locking DeviceAdapter Mounted
-
MaterialCast Iron
-
Maximum Speed2200 rpm Grease/3000 rpm Oil
-
TypeType USAF
-
Mounting TypeFour-Bolt Base
-
Seal TypeTriple-Tect™
-
Base Width4.72 in
-
Base to Bore Centerline5-1/4 in
-
Bolt Center-to-Center Length13-1/4 to 14-1/2 in
-
Bore Diameter3-7/16 in
-
Bore TypeTapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height10-1/4 in
-
Overall Length16-1/2 in
-
Overall Width8.05 in
- Closed end housings offer greater protection in high pressure wash-down environments
- Solid cast iron feet increase strength in both 2 and 4-bolt styles
- Standard modifications for wet and harsh environments include nylon coating, epoxy paints and nickel plating and stainless steel hardware
- New drop in Triple-Tect™ seal makes seal installation easier
- Large capacity oil sump lowers operating temperatures, undercut bearing seat allows full lateral travel of expansion bearing, prevents stabilizer ring from binding and makes installation easy
- Oil equalization passage simplifies maintenance and pillow block can be drained completely from either side
- Oil return slots are cast into the interior seal grooves to keep lubricants
- Allows oil in the seal grooves to return to the oil sump instead of leaking
- Offset dowels with matched numbers on cap and base joint simplify correct assembly
- Both ends open
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 101862399 |
-
Alternative Part NumberP4B620-USAF-307TT
-
UNSPSC31171516
-
Package Description1/PK
-
Standards/ApprovalsAFBMA/AGMA/ASAMMA/BSA/CMA/MPTA/PTDA Standards|UL Listed
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
P-4-B-62-0USAF-307-TT Dodge® 039417 Type USAF Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 13-1/4 to 14-1/2 in L Bolt Center-to-Center, 5-1/4 in Base to Bore Centerline, 16-1/2 in OAL x 10-1/4 in OAH
USAF housing features including solid cast feet to increase strength, large capacity oil sump with two oversized drain holes adaptable to circulating oil systems, cast in oil return slots to keep lubricants in, oil-equalization passage allowing pillow block to be drained completely from either side, offset dowels with matched numbers on cape and base to simplify correct assembly, cast-in dimples to locate drill holes for lube fittings, vents, sensors and mounting modifications, housing base threaded to accept grade 5 cap bolts for added strength and pry slots between the cap and base to allow easy separation. Utilizes E design spherical roller bearing insert for higher load carrying capacity. USAF and USDAF match industry standard SAF and SDAF mounting dimensions.
Sealmaster 1-7/16"-ID 4-BOLT SPH FLANGE UNITS BRW SFC-1000-NE X 1-7/16
Sealmaster® USRB performance mounted spherical roller bearings feature black oxide treated bearing steel races with optimized bearing geometry for load capacity, misalignment and speed capabilities. The USRB is available in both setscrew locking and adapter mounting system. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in a wide variety of bore sizes, housing styles and sealing options.
Dodge® 071128 115 Imperial Type E Pillow Block Roller Bearing Unit, 2 in Dia Bore, 6.88 to 7.12 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.87 in OAL x 4.47 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
Drillco 76A108C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Drillco 76A128C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
