Browning® 1069368 Split Taper Bushing, 13/16 in Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
-
BrandBrowning®
-
UPC662289279210
-
Manufacturer Part Number1069368
-
CountryUSA
-
MaterialSintered Steel
-
Flange Diameter3 in
-
Flange Thickness13/32 in
-
Screw Size5/16 x 1 in
-
Number of Bolt Holes3
-
Barrel Diameter1.8555 in Small End/1.9375 in Large End
-
Keyway Size3/16 x 3/32 in
-
Bolt Circle Diameter2-7/16 in
-
Bore Diameter13/16 in
-
Overall Length1-15/16 in
-
Suitable For Use WithBrowning® Multiple Groove Sheave
- Solid Flange and Double Split Barrel - Assures better concentricity to the shaft
- Key to Key Drive - With keys on both the shaft and product to provide the strongest possible drive
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
-
Alternative Part NumberP1 13/16
-
UNSPSC31171605
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1069368 Split Taper Bushing, 13/16 in Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 1-15/16 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Wilton® WL9-14271 Spark-Duty™ 400P Deep Throat Regular Duty C-Clamp, 5 in D Throat, 0 to 8-1/4 in Clamping, 3/4 in Screw
Wilton® Spark-Duty™ 400 series c-clamps are ideal for steel fabrication and industrial welding. Each boasts drop forged construction an ACME rolled copper plated spindle to resist welding spatter, replaceable Perma-Pads® and a V-grooved anvil for secure holding of all materials.
Gates® Power Transmission Hi-Power® II A86 Banded Classical Heavy Duty V-Belt, A Section, 1/2 in W Top, 88 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
3-LB PLUMBERS PUTTY-JWH408133 >
BRASS SCRAPERS WITH HANDLE-NGKB45 >
