QD Bushings
Browning® 1078096 QD Bushing, 2-5/8 in Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning® 3207974 Type SH Q-D® Bushing, 25 mm Dia Bore, 1.871 in Dia Barrel, 2-11/16 in Dia Flange, 1.2 in OAL, Ductile Iron
Browning® 3207974 Type SH Q-D® Bushing, 25 mm Dia Bore, 1.871 in Dia Barrel, 2-11/16 in Dia Flange, 1.2 in OAL, Ductile Iron
Browning® 3207982 QD Bushing, 28 mm Dia Bore, 1-7/8 in Dia Barrel, 68.2625 mm Dia Flange, 30.48 mm OAL, Ductile Iron
Browning® 3207982 QD Bushing, 28 mm Dia Bore, 1-7/8 in Dia Barrel, 68.2625 mm Dia Flange, 30.48 mm OAL, Ductile Iron
Browning® 3208048 Type SDS Q-D® Bushing, 28 mm Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.33 in OAL, Steel
Browning® 3208048 Type SDS Q-D® Bushing, 28 mm Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.33 in OAL, Steel
Browning® 3208139 Type SD Q-D® Bushing, 25 mm Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Cast Iron
Browning® 3208139 Type SD Q-D® Bushing, 25 mm Dia Bore, 2-3/16 in Dia Barrel, 3-1/8 in Dia Flange, 1.83 in OAL, Cast Iron
Browning® 3208212 Type SK Q-D® Bushing, 24 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Cast Iron
Browning® 3208212 Type SK Q-D® Bushing, 24 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Cast Iron
Browning® 3208238 Type SK Q-D® Bushing, 28 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Browning® 3208238 Type SK Q-D® Bushing, 28 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Browning® 3208261 Type SK Q-D® Bushing, 35 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Cast Iron
Browning® 3208261 Type SK Q-D® Bushing, 35 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Cast Iron
Browning® 3208279 Type SK Q-D® Bushing, 38 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Browning® 3208279 Type SK Q-D® Bushing, 38 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Steel
Browning® 3208287 Type SK Q-D® Bushing, 40 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Browning® 3208287 Type SK Q-D® Bushing, 40 mm Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Dodge® 120479 QD Bushing, 2-7/16 in Dia Bore, 3.13 in Dia Barrel, 4-5/8 in Dia Flange, 2 in OAL, Ductile Iron
Dodge® 120479 QD Bushing, 2-7/16 in Dia Bore, 3.13 in Dia Barrel, 4-5/8 in Dia Flange, 2 in OAL, Ductile Iron
Dodge® SDSX1-3/4 Type SDS QD Bushing, 1-3/4 in Dia Bore, 2-3/16 in Dia Barrel, 3-3/16 in Dia Flange, 1-5/16 in OAL, Ductile Iron
Dodge® QD® bushings have a flanged design and feature a 4 deg taper with conventional or reverse mounting. They are stocked in popular finished bore sizes and minimum plain bore for custom reboring.
Dodge® SKX15/16 Type SK QD Bushing, 15/16 in Dia Bore, 2-13/16 in Dia Barrel, 3-5/16 in Dia Flange, 1-7/8 in OAL, Ductile Iron
Dodge® QD® bushings have a flanged design and feature a 4 deg taper with conventional or reverse mounting. They are stocked in popular finished bore sizes and minimum plain bore for custom reboring.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Recently Viewed
DRILLCO 7B132BDC 7000B Rotary File, End Cut End, Cylindrical Head, 1/2 in Dia Head, 1 in L of Cut, Double Cut
Drillco solid carbide burrs are extremely versatile. Manufactured from premium grade tungsten carbide. Burrs are available in standard lengths (single and double cut), 6" long series, and in miniature sizes (for use in pencil grinders).
Jones Stephens™ B90050 1-Piece Ball Valve, 1/2 in, Solvent, PVC Body, Standard Port, EPDM Softgoods
DRILLCO 400N129 Type B Heavy Duty Jobber Length Drill Bit, 29/64 in Drill - Fraction, 0.4531 in Drill - Decimal Inch, 135 deg Point, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
Browning® 1224542 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 46 Teeth, 4.6 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
